Operating Instructions OPTISWITCH 3100 C with two-wire output
|
|
- Christian Ramsey
- 5 years ago
- Views:
Transcription
1 Operating Instructions OPTISWITCH 3100 C with two-wire output
2 Contents Contents 1 About this document 1.1 Function Target group Symboism used For your safety 2.1 Authorised personne Appropriate use Warning about misuse CE conformity SIL conformity Safety instructions for Ex areas Product description 3.1 Configuration Principe of operation Operation Storage and transport Mounting 4.1 Genera instructions Mounting instructions Connecting to votage suppy 5.1 Preparing the connection Connection steps Wiring pan, singe chamber housing Set up 6.1 Genera Adjustment eements Function chart Maintenance and faut rectification 7.1 Maintenance Rectify fauts Exchange the eectronics Instrument repair Dismounting 8.1 Dismounting procedure Disposa OPTISWITCH 3100 C - with two-wire output
3 Contents 9 Suppement 9.1 Technica data Dimensions Suppementary operating instructions manuas Information: OPTISWITCH 3100 C is avaiabe in different versions. Depending on the seected version, suppementary operating instructions manuas may aso come with the shipment. The suppementary operating instructions manuas are isted in section "Product description. Operating instructions manuas for accessories and repacement parts Tip: To ensure reiabe setup and operation of your OPTISWITCH 3100 C, we offer accessories and repacement parts. The associated documents are: Operating instructions manua "Osciator" OPTISWITCH 3100 C - with two-wire output 3
4 About this document 1 About this document 1.1 Function This operating instructions manua has a the information you need for quick setup and safe operation. Pease read this manua before you start setup. 1.2 Target group This operating instructions manua is directed to trained, quaified personne. The contents of this manua shoud be made avaiabe to these personne and put into practice by them. 1.3 Symboism used Information, tip, note This symbo indicates hepfu additiona information. Caution: If this warning is ignored, fauts or mafunctions can resut. Warning: If this warning is ignored, injury to persons and/or serious damage to the instrument can resut. Danger: If this warning is ignored, serious injury to persons and/or destruction of the instrument can resut. Ex appications This symbo indicates specia instructions for Ex appications. à List The dot set in front indicates a ist with no impied sequence. Action This arrow indicates a singe action. 1 Sequence Numbers set in front indicate successive steps in a procedure. 4 OPTISWITCH 3100 C - with two-wire output
5 For your safety 2 For your safety 2.1 Authorised personne A operations described in this operating instructions manua must be carried out ony by trained speciaist personne authorised by the operator. For safety and warranty reasons, any interna work on the instruments must be carried out ony by personne authorised by the manufacturer. 2.2 Appropriate use OPTISWITCH 3100 C is a sensor for eve detection. Detaied information on the appication range of OPTISWITCH 3100 C is avaiabe in chapter "Product description". 2.3 Warning about misuse Inappropriate or incorrect use of the instrument can give rise to appication-specific hazards, e.g. vesse overfi or damage to system components through incorrect mounting or adjustment. 2.4 Genera safety instructions OPTISWITCH 3100 C is a high-tech instrument requiring the strict observance of standard reguations and guideines. The user must take note of the safety instructions in this operating instructions manua, the country-specific instaation standards (e.g. the VDE reguations in Germany) as we as a prevaiing safety reguations and accident prevention rues. 2.5 CE conformity OPTISWITCH 3100 C is in CE conformity with EMC (89/336/ EWG), fufis NAMUR recommendation NE 21 and is in CE conformity with LVD (73/23/EWG). Conformity has been judged according to the foowing standards: EMC: - Emission EN 61326: 1997 (cass B) - Susceptibiity EN 61326: 1997/A1:1998 LVD: EN : 2001 OPTISWITCH 3100 C - with two-wire output 5
6 For your safety 2.6 SIL conformity OPTISWITCH 3100 C fufis the requirements of functiona safety according to IEC 61508/IEC You can find further information in the suppementary instructions manua "Safety Manua - Functiona safety (SIL) OPTISWITCH 3XXX". 2.7 Safety instructions for Ex areas Pease note the Ex-specific safety information for instaation and operation in Ex areas. These safety instructions are part of the operating instructions manua and come with the Exapproved instruments. 6 OPTISWITCH 3100 C - with two-wire output
7 Product description 3 Product description 3.1 Configuration Scope of deivery Components The scope of deivery encompasses: OPTISWITCH 3100 C eve sensor Documentation - this operating instructions manua - Suppementary instructions manua "Pug connector for eve sensors" (optiona) - Ex specific safety instructions (with Ex versions), if necessary further certificates OPTISWITCH 3100 C consists of the foowing components: Housing cover Housing with eectronics process fitting with tuning fork Fig. 1: OPTISWITCH 3100 C with pastic housing 1 Housing cover 2 Housing with eectronics 3 Process fitting 3.2 Principe of operation Area of appication OPTISWITCH 3100 C is a eve sensor with tuning fork for eve detection. It is designed for industria use in a areas of process technoogy and is preferaby used for buk soids. Typica appications are overfi and dry run protection. Thanks to its simpe and robust measuring system, OPTISWITCH 3100 C is virtuay unaffected by the chemica and physica properties of the buk soid. OPTISWITCH 3100 C - with two-wire output 7
8 Product description It functions even when exposed to strong externa vibration or changing products. Soid detection in water If OPTISWITCH 3100 C was ordered for detection of soids in water, the tuning fork is adjusted to the density of water. In the air or when covered by water (density: 1 g/cm³/0.036 bs/in) OPTISWITCH 3100 C signas "uncovered". Ony if the vibrating eement is aso covered with soids (e.g. sand, sudge, grave etc.) wi the sensor signa "covered". Faut monitoring The eectronics of OPTISWITCH 3100 C continuousy monitors the foowing criteria: Correct vibrating frequency Line break to the piezo drive If one of these fauts is detected, the eectronics signas this via adefined current to the signa conditioning instrument. The connection cabe to the vibrating eement is aso monitored. Physica principe Power suppy The tuning fork is piezoeectricay energised and vibrates at its mechanica resonance frequency of approx. 150 Hz. When the tuning fork is submerged in the product, the vibration ampitude changes. This change is detected by the integrated osciator and converted into a switching command. Depending on your requirements, OPTISWITCH 3100 C with two-wire eectronics can be connected to different signa conditioning instruments. Compatibe signa conditioning instruments are isted under "Technica data". The exact range of the power suppy is stated in the "Technica data" in the "Suppement". 3.3 Operation With the factory setting, products with a density of >0.02 g/cm³ (> bs/in³) can be measured. The instrument can aso be adapted to products with ower density >0.008 g/cm³ (> bs/in³). On the eectronics modue you wi find the foowing indicating and adjustment eements: signa amp for indication of the switching condition (green/ red) potentiometer for adaptation to the product density mode switch for seection of the output current 8 OPTISWITCH 3100 C - with two-wire output
9 Product description 3.4 Storage and transport Packaging Storage and transport temperature Your instrument was protected by packaging during transport. Its capacity to hande norma oads during transport is assured by a test according to DIN The packaging of standard instruments consists of environment-friendy, recycabe cardboard. In addition, the sensor is provided with a protective cover of cardboard. For specia versions PE foam or PE foi is aso used. Dispose of the packaging materia via speciaised recycing companies. Storage and transport temperature see "Suppement - Technica data - Ambient conditions" Reative humidity % OPTISWITCH 3100 C - with two-wire output 9
10 Mounting 4 Mounting 4.1 Genera instructions Switching point Moisture In genera, OPTISWITCH 3100 C can be mounted in any position. The instrument must be mounted in such a way that the vibrating eement is at the height of the requested switching point. Use the recommended cabes (see chapter "Connecting to power suppy") and tighten the cabe gand. You can give your OPTISWITCH 3100 C additiona protection against moisture penetration by eading the connection cabe downward in front of the cabe entry. Rain and condensation water can thus drain off. This appies mainy to mounting outdoors, in areas where moisture is expected (e.g. by ceaning processes) or on cooed or heated vesses. Fig. 2: Measures against moisture penetration Transport Do not hod OPTISWITCH 3100 C on the vibrating eement. Especiay with fange and tube versions, the sensor can be damaged by the weight of the instrument. Remove the protective cover just before mounting. Pressure/Vacuum The process fitting must be seaed if there is gauge or ow pressure in the vesse. Before use, check if the sea materia is resistant against the measured product and the process temperature. The max. permissibe pressure is stated in the "Technica data" in the "Suppement" or on the type abe of the sensor. 10 OPTISWITCH 3100 C - with two-wire output
11 Mounting Handing The vibrating eve switch is a measuring instrument and must be treated accordingy. Bending the vibrating eement wi destroy the instrument. Warning: The housing must not be used to screw in the instrument! Appying tightening force on the housing can damage its interna mechanica parts. To screw in, use the hexagon above the thread. 4.2 Mounting instructions Socket Fiing opening The vibrating eement shoud protrude into the vesse to avoid buidup. For that reason, avoid using mounting bosses for fanges and screwed fittings. This appies particuary to use with adhesive products. Mount the instrument in such a way that the tuning fork does not protrude directy into the fiing stream. a. b. 20 Fig. 3: Horizonta mounting a Convex mounting b Concave mounting If such an instaation ocation shoud be necessary, mount a suitabe protective sheet above or in front of the vibrating eement - see iustration a.). OPTISWITCH 3100 C - with two-wire output 11
12 Mounting In abrasive soids, mounting according to iustration b. has proven. A spout forms in the concave protective sheet preventing wear of the protective sheet. Horizonta mounting To achieve a very precise switching point, you can insta OPTISWITCH 3100 C horizontay. However, if the switching point can have a toerance of a few centimeters, we recommend mounting OPTISWITCH 3100 C approx. 20 incined to the vesse bottom to avoid buidup. a. b. 20 Fig. 4: Horizonta mounting a Protective sheet b Concave protective sheet for abrasive soids Infowing medium Fows If OPTISWITCH 3100 C is mounted in the fiing stream, unwanted switching signas may be generated. Mount OPTI- SWITCH 3100 C at a ocation in the vesse where no disturbing infuence from e.g. fiing openings, agitators etc. can occur. To minimise fow resistance caused by the tuning fork, OPTISWITCH 3100 C shoud be mounted in such a way that the surfaces of the bades are parae to the product movement. 12 OPTISWITCH 3100 C - with two-wire output
13 Mounting 1 2 Fig. 5: Orientation of the tuning fork in case of fow 1 Marking with screwed version 2 Direction of fow Adhesive products In case of horizonta mounting in adhesive products, the surfaces of the tuning fork shoud be vertica in order to reduce buidup on the bades. On the screwed version you wi find a marking on the hexagon. With this, you can check the position of the tuning fork when screwing it in. When the hexagon touches the sea, the thread can be sti turned by approx. haf a turn. This is sufficient to reach the recommended instaation position. With fange versions, the fork is directed to the fange hoes. 1 Baffe protection against faing rocks Fig. 6: Vertica instaation - marking 1 Marking on top with screwed version In appications such as grit chambers or setting basins for coarse sediments, the vibrating eement must be protected against damage with a suitabe baffe. This baffe must be manufactured by you. OPTISWITCH 3100 C - with two-wire output 13
14 Mounting >125 Fig. 7: Baffe protection against damages 14 OPTISWITCH 3100 C - with two-wire output
15 Connecting to votage suppy 5 Connecting to votage suppy 5.1 Preparing the connection Note safety instructions Take note of safety instructions for Ex appications Generay not the foowing safety instructions: Connect ony in the compete absence of ine votage In hazardous areas you shoud take note of the appropriate reguations, conformity and type approva certificates of the sensors and power suppy units. Seect power suppy Seecting the connection cabe Connect the power suppy according to the foowing diagrams. Take note of the genera instaation reguations. As a rue, connect OPTISWITCH 3100 C to vesse ground (PA), or in case of pastic vesses, to the next ground potentia. On the side of the instrument housing there is a ground termina between the cabe entries. This connection serves to drain off eectrostatic charges. In Ex appications, the instaation reguations for hazardous areas must be given priority. The data for power suppy are stated in the "Technica data" in the "Suppement". OPTISWITCH 3100 C is connected with standard cabe with round cross-section. An outer cabe diameter of 5 9 mm ( in) ensures the sea effect of the cabe entry. If cabe with a different diameter or wire cross section is used, exchange the sea or use an appropriate cabe connection. In hazardous areas, ony use approved cabe connections for OPTISWITCH 3100 C. Seect connection cabe for Ex appications Take note of the corresponding instaation reguations for Ex appications. 5.2 Connection steps With Ex instruments, the housing cover may ony be opened if there is no exposive atmosphere present. Proceed as foows: 1 Unscrew the housing cover 2 Loosen compression nut of the cabe entry OPTISWITCH 3100 C - with two-wire output 15
16 Connecting to votage suppy 3 Remove approx. 10 cm (4 in) of the cabe mante, strip approx. 1 cm (0.4 in) insuation from the ends of the individua wires 4 Insert the cabe into the sensor through the cabe entry 5 Lift the opening evers of the terminas with a screwdriver (see foowing iustration) 6 Insert the wire ends into the open terminas according to the wiring pan 7 Press the opening ever of the terminas downward, you wi hear the termina spring cosing 8 Check the hod of the wires in the terminas by ighty puing on them 9 Tighten the compression nut of the cabe entry, the sea ring must competey encirce the cabe 10 If necessary, carry out a fresh adjustment 11 Screw the housing cover back on The eectrica connection is hence finished. Fig. 8: Connection steps 5 and Wiring pan, singe chamber housing The foowing iustrations appy to the non-ex as we as to the EEx d version. 16 OPTISWITCH 3100 C - with two-wire output
17 Connecting to votage suppy Housing overview Fig. 9: Materia versions, singe chamber housing 1 Pastic (not with EEx d) 2 Auminium 3 Stainess stee (not with EEx d) 4 Fiter eement for pressure compensation (not with EEx d) Eectronics and connection compartment Fig. 10: Eectronics and connection compartment 1 Potentiometer for switching point adaptation (covered) 2 DIL switch for mode adjustment 3 Ground termina 4 Screwed terminas 5 Contro amp Wiring pan For connection to a signa conditioning instrument. The sensor is powered via the connected signa conditioning instrument. For further information see the "Technica data" in the "Suppement". The wiring exampe is appicabe for a suitabe signa conditioning instruments. If the mode switch of OPTISWITCH 3100 C is correcty set to "max.", the contro amp on OPTISWITCH 3100 C ights. OPTISWITCH 3100 C - with two-wire output 17
18 Connecting to votage suppy red - with submerged vibrating eement green - with uncovered vibrating eement Take note of the operating instructions manua of the signa conditioning instrument. Suitabe signa conditioning instruments are isted in the "Technica data". 1 Fig. 11: Wiring pan 1 Votage suppy 18 OPTISWITCH 3100 C - with two-wire output
19 Set up 6 Set up 6.1 Genera The numbers in brackets refer to the foowing iustrations. Function/Configuration On the eectronics modue you wi find the foowing indicating and adjustment eements: Potentiometer for switching point adaptation (1) DIL switch for mode adjustment - min./max. (2) Signa amp (5) Note: As a rue, aways set the mode with mode switch (2) before starting the setup of OPTISWITCH 3100 C. If the instrument is used in conjunction with a signa conditioning instrument, aways set the mode switch (2) on OPTISWITCH 3100 C to max. mode. The mode is seected on the signa conditioning instrument with the mode switch. The switching output wi change if you set one of the two mode switches afterwards. This coud possiby trigger other connected instruments or devices. OPTISWITCH 3100 C - with two-wire output 19
20 Set up 6.2 Adjustment eements Fig. 12: Osciator WE60Z - two-wire output 1 Potentiometer for switching point adaptation 2 DIL switch for mode adjustment 3 Ground termina 4 Screwed terminas 5 Contro amp Switching point adaptation (1) With the potentiometer you can adapt the switching point to the soid. It is aready preset and must ony be modified in specia cases. By defaut, the potentiometer of OPTISWITCH 3100 C is set to the right stop (>0.02 g/cm³ or > bs/in³). In case of very ight-weight soids, turn the potentiometer to the eft stop (>0.008 g/cm³ or > bs/in³). OPTISWITCH 3100 C wi thus be more sensitive and can detect ight-weight soids more reiaby. For instruments detecting soids in water, these vaues are not appicabe. The potentiometer is preset and must not be changed. Mode adjustment (2) With the mode adjustment (min./max.) you can determine the output current. When using a signa conditioning instrument, aways set the mode switch to max. mode. In this case, you seect the requested mode acc. to the "Function chart" (max. - max. detection or overfi protection, 20 OPTISWITCH 3100 C - with two-wire output
21 Set up Signa amp (5) min. -min.detection or dry run detection) on the signa conditioning instrument. When used on a contro system, the foowing vaues appy: Mode min. - Vibrating eement uncovered - 16 ma ±1 ma - Vibrating eement covered - 8 ma ±1 ma Mode max. - Vibrating eement uncovered - 8 ma ±1 ma - Vibrating eement covered - 16 ma ±1 ma Contro amp for indication of the switching condition. green = 8 ma red = 16 ma red (fashing) = Faiure (<2.3 ma) 6.3 Function chart OPTISWITCH 3100 C eve switch The foowing chart provides an overview of the switching conditions depending on the adjusted mode and eve. Mode on the sensor Leve Signa current - Sensor Signa amp - sensor max. Overfi protection 8 ma max. Overfi protection approx. 16 ma Green min. Dry run protection approx. 8 ma red min. Dry run protection approx. 16 ma Green OPTISWITCH 3100 C - with two-wire output 21 red
22 Set up Mode on the sensor Leve Signa current - Sensor Signa amp - sensor Faut signa any <2.3 ma (min./max. mode) fashes red OPTISWITCH 3100 C eve switch with signa conditioning instrument 1) The foowing chart provides an overview of the switching conditions depending on the adjusted mode of the signa conditioning instrument and the eve. Note: Keep in mind that the mode switch of OPTISWITCH 3100 C must be aways set to "max.". Mode on the signa conditioning instrument Leve Signa current - Sensor Signa amp - sensor Signa amp - signa conditioning instrument Mode A Overfi protection approx. 8 ma Green Mode A Overfi protection approx. 16 ma red Mode B Dry run protection approx. 16 ma red Mode B Dry run protection approx. 8 ma Green 1) You wi find suitabe signa conditioning instruments under "Technica data" 22 OPTISWITCH 3100 C - with two-wire output
23 Set up Mode on the signa conditioning instrument Leve Signa current - Sensor Signa amp - sensor Signa amp - signa conditioning instrument Faut signa (mode A/B) any <2.3 ma fashes red OPTISWITCH 3100 C - with two-wire output 23
24 Maintenance and faut rectification 7 Maintenance and faut rectification 7.1 Maintenance When used as directed in norma operation, OPTISWITCH 3100 C is competey maintenance free. 7.2 Rectify fauts Causes of mafunction Faut rectification OPTISWITCH 3100 C offers maximum reiabiity. Nevertheess fauts can occur during operation. These may be caused by the foowing, e.g.: Sensor Process Power suppy Signa processing The first measure to be taken is to check the output signa. In many cases, the causes can be determined this way and the fauts rectified. Checking the switching signa? OPTISWITCH 3100 C signas "covered" when the vibrating eement is not submerged (overfi protection)? OPTISWITCH 3100 C signas "uncovered" when the vibrating eement is submerged (dry run protection) Suppy votage too ow à Check the power suppy Eectronics defective à Press the mode switch (min./max.). If the instrument then changes the mode, the instrument may be mechanicay damaged. Shoud the switching function in the correct mode sti be fauty, return the instrument for repair. à Push the mode switch. If the instrument then does not change the mode, the osciator may be defective. Exchange the osciator. à Check if there is buidup on the vibrating eement, and if so, remove it. Unfavourabe instaation ocation à Mount the instrument at a ocation in the vesse where no dead zones or mounds can form. à Check if the vibrating eement is covered by buidup on the socket. 24 OPTISWITCH 3100 C - with two-wire output
25 Maintenance and faut rectification Wrong mode seected à Set the mode switch on OPTISWITCH 3100 C to "max". Set the correct mode on the signa conditioning instrument (A: overfi protection; B: dry run protection).? Signa amp fashes red Eectronics has detected a faiure à Exchange instrument or return instrument for repair 7.3 Exchange the eectronics In genera, a osciators of series WE60 can be interchanged. If you want to use an osciator with a different signa output, you can downoad the corresponding operating instructions manua from our homepage under Downoads. With EEx d instruments, the housing cover must ony be opened if there is no exposive atmosphere. Proceed as foows: 1 Switch off power suppy 2 Unscrew the housing cover 3 Lift the opening evers of the terminas with a screwdriver 4 Pu the connection cabes out of the terminas 5 Loosen the two screws with a screw driver (Torx size T10 or sot 4) 1 2 Fig. 13: Loosen the screws 1 Eectronics modue 2 Screws (2 pcs.) OPTISWITCH 3100 C - with two-wire output 25
26 Maintenance and faut rectification 6 Remove the od osciator 7 Compare the new osciator with the od one. The type abe of the osciator must correspond to that of the od osciator. This appies particuary to instruments used in hazardous areas. 8 Compare the settings of the two osciators. Set the adjustment eements of the new osciator to the same setting of the od one. Information: Make sure that the housing is not rotated during the eectronics exchange. Otherwise the pug may be in a different position ater. 9 Insert the osciator carefuy. Make sure that the pug is in the correct position. 10 Tighten the two screws with a screwdriver (Torx size T10 or sot 4). 11 Insert the wire ends into the open terminas according to the wiring pan 12 Press the opening ever of the terminas downward, you wi hear the termina spring cosing 13 Check the hod of the wires in the terminas by ighty puing on them 14 Check the tightness of the cabe entry. The sea ring must competey encirce the cabe. 15 Screw the housing cover back on The eectronics exchange is now finished. 7.4 Instrument repair If a repair is necessary, pease proceed as foows: You can downoad a return form from our website krohne-mar.com/fieadmin/media-ounge/pdf-downoad/ Specimen_e.pdf. By doing this you hep us carry out the repair quicky and without having to ca back for needed information. Print and fi out one form per instrument Cean the instrument and pack it damage-proof Attach the competed form and possiby aso a safety data sheet to the instrument 26 OPTISWITCH 3100 C - with two-wire output
27 Dismounting 8 Dismounting 8.1 Dismounting procedure Warning: Before dismounting, be aware of dangerous process conditions such as e.g. pressure in the vesse, high temperatures, corrosive or toxic products etc. Take note of chapters "Mounting" and "Connecting to power suppy" and carry out the isted steps in reverse order. With Ex instruments, the housing cover may ony be opened if there is no exposive atmosphere present. 8.2 Disposa The instrument consists of materias which can be recyced by speciaised recycing companies. We use recycabe materias and have designed the eectronic modues to be easiy separabe. WEEE directive 2002/96/EG This instrument is not subject to the WEEE directive 2002/96/ EG and the respective nationa aws (in Germany, e.g. EektroG). Pass the instrument directy on to a speciaised recycing company and do not use the municipa coecting points. These may be used ony for privatey used products according to the WEEE directive. Correct disposa avoids negative effects to persons and environment and ensures recycing of usefu raw materias. Materias: see "Technica data" If you cannot dispose of the instrument propery, pease contact us about disposa methods or return. OPTISWITCH 3100 C - with two-wire output 27
28 Suppement 9 Suppement 9.1 Technica data Genera data Materia 316L corresponds to or Materias, wetted parts - Process fitting - thread 316L - Process fitting - fange 316L - Process sea Kingersi C Tuning fork 316L - Extension tube ø 43 mm (1.7 in) 316L Materias, non-wetted parts - Housing Pastic PBT (Poyester), Au die-casting powder-coated, 316L - Sea ring between housing and housing cover - Ground termina 316L Weight - with pastic housing 1500 g (53 oz) - with Auminium housing 1950 g (69 oz) - with stainess stee housing 2300 g (81 oz) NBR (stainess stee housing), siicone (Au/ pastic housing) Max. atera oad 600 N (135 bf) ongitudina to the fork side Output variabe Output Suitabe signa conditioning instrument Output signa - Mode min. Two-wire output SU 501 Ex Vibrating eement uncovered - 16 ma ±1 ma Vibrating eement covered - 8 ma ±1 ma - Mode max. Vibrating eement uncovered - 8 ma ±1 ma Vibrating eement covered - 16 ma ±1 ma - Faut signa <2.3 ma Modes (adjustabe) min./max. 28 OPTISWITCH 3100 C - with two-wire output
29 Suppement Integration time - when immersed approx. 0.5 s - when aid bare approx. 1 s Ambient conditions Ambient temperature on the housing Storage and transport temperature C ( F) C ( F) Process conditions Parameter Process pressure Limit eve of soids bar/ kpa ( psi) 2 16 bar (232psi) 6 bar (87psi) 1-50 C (-58 F) 0 C (32 F) 50 C (122 F) 100 C (212 F) 150 C (302 F) 200 C (392 F) 250 C (482 F) Fig. 14: Process pressure - Product temperature 1 Product temperature 2 Process pressure OPTISWITCH 3100 C of 316L Process temperature (thread or fange temperature) with temperature adapter (option) C ( F) C ( F) OPTISWITCH 3100 C - with two-wire output 29
30 Suppement 2 80 C (176 F) 3 40 C (104 F) 0 C (32 F) -50 C (-58 F) -40 C (-40 F) 50 C (122 F) 100 C (212 F) 150 C (302 F) 200 C (392 F) C (482 F) Fig. 15: Ambient temperature - Product temperature 1 Product temperature 2 Ambient temperature 3 Temperature range with temperature adapter Density - Standard >0.02 g/cm³ ( bs/in³) - adjustabe >0.008 g/cm³ ( bs/in³) Eectromechanica data Cabe entry/pug 2) - Singe chamber housing 1x cabe entry M20x1.5 (cabe-ø 5 9 mm), 1x bind stopper M20x1.5 or: 1x cosing cap ½ NPT, 1x bind pug ½ NPT or: Spring-oaded terminas 1x pug (depending on the version), 1x bind pug M20x1.5 for wire cross-section up to 1.5 mm² ( in²) Adjustment eements Mode switch - min. Min. detection or dry run protection - max. Max. detection or overfi protection 2) Depending on the version M12x1, according to DIN 43650, Harting, Ampheno-Tuche, 7/8" FF. 30 OPTISWITCH 3100 C - with two-wire output
31 Suppement Votage suppy Suppy votage VDC(via the signa conditioning instrument) Eectrica protective measures Protection IP 66/IP 67 Overvotage category III Protection cass II Approvas 3) ATEX II 1G, 1/2G, 2G EExiaIIC T6 4) ATEX II 1G, 1/2G, 2G EExiaIIC T6 + ATEX II 1/2 DIP66 T ATEX II 1/2G, 2G EExd d IIC T6 ATEX II 1/2 DIP66 T 5) 3) Deviating data in Ex appications: see separate safety instructions. 4) Ony in conjunction with eectronics "Z" 5) See temperature statements in the safety instructions manua OPTISWITCH 3100 C - with two-wire output 31
32 Suppement 9.2 Dimensions OPTISWITCH 3100 C ~ 69mm (2 23/ 32") ø 77mm (3 1/ 32") ~ 69mm (2 23/ 32") ø 77mm (3 1/ 32") ~ 116mm (4 9/ 16") ø 84mm (3 5/ 16") 112mm (4 13/32") 117mm (4 39/64") 114mm (4 31/64") ½ M20x1,5/ ½ NPT M20x1,5/ ½ NPT M20x1, Fig. 16: Housing versions 1 Pastic housing 2 Stainess stee housing 3 Auminium housing 32 OPTISWITCH 3100 C - with two-wire output
33 Suppement 220mm (8 21/32") 150mm (5 29/32") 22mm (55/64") 33mm (1 19/64") G1½A ø 43mm (1 11/ 16 ") Fig. 17: OPTISWITCH 3100 C, threaded version G1½ A OPTISWITCH 3100 C - with two-wire output 33
34 Suppement 178mm (7 1/64") ø 34mm (1 11/ 32 ") Fig. 18: Temperature adapter 34 OPTISWITCH 3100 C - with two-wire output
35 Suppement OPTISWITCH 3100 C - with two-wire output 35
36 Subject to change without notice
Operating Instructions OPTISWITCH 3000 C with two-wire output
Operating Instructions OPTISWITCH 3000 C with two-wire output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised personne...
More informationOperating Instructions OPTISWITCH 3300 C with two-wire output
Operating Instructions OPTISWITCH 3300 C with two-wire output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised personne...
More informationOperating Instructions VEGAVIB 63 with relay output
Operating Instructions VEGAVIB 63 with reay output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised personne... 5
More informationOperating Instructions VEGACAP 27 - double relay (DPDT)
Operating Instructions VEGACAP 27 - doube reay (DPDT) Capacitive Contents Contents 1 About this document 1.1 Function............................. 5 1.2 Target group.......................... 5 1.3 Symboism
More informationOperating Instructions VEGASON 61
Operating Instructions VEGASON 61 4 20 ma/hart Utrasonic Contents Contents 1 About this document 1.1 Function............................. 5 1.2 Target group.......................... 5 1.3 Symboism used.......................
More informationOperating Instructions VEGABAR 64
Operating Instructions VEGABAR 64 4... 20 ma/hart p Process pressure/ Hydrostatic Contents Contents 1 About this document 1.1 Function............................. 5 1.2 Target group..........................
More informationOperating Instructions VEGAPULS 67 Foundation Fieldbus
Operating Instructions VEGAPULS 67 Foundation Fiedbus Radar Contents Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symboism used... 5 2 For your safety 2.1 Authorised personne...
More informationOperating Instructions VEGAPULS 67 Profibus PA
Operating Instructions VEGAPULS 67 Profibus PA Radar Contents Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symboism used... 5 2 For your safety 2.1 Authorised personne...
More informationOperating Instructions VEGACAL 63 Profibus PA
Operating Instructions VEGACAL 63 Profibus PA Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised personne... 5 2.2 Appropriate
More informationOperating Instructions VEGABAR 14
Operating Instructions VEGABAR 14 p Process pressure Contents Contents 1 About this document 1.1 Function............................. 4 1.2 Target group.......................... 4 1.3 Symboism used.......................
More informationProduct Information. Hydrostatic Submersible pressure transmitter VEGABAR 86, 87 VEGAWELL 52
Product Information Hydrostatic Submersibe pressure transmitter VEGABAR 86, 87 VEGAWELL 5 Contents Contents Measuring principe.......................................................................................
More informationOperating Instructions VEGAWELL 51
Operating Instructions VEGAWELL 51 4 20 ma p Process pressure/ Hydrostatic Contents Contents 1 About this document 1.1 Function............................. 4 1.2 Target group..........................
More informationOperating Instructions. Ball valve fitting according to ZB For pressure transmitter VEGABAR 82. Document ID: 50027
Operating Instructions Ball valve fitting according to ZB 2553 For pressure transmitter VEGABAR 82 Document ID: 50027 Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3 1.3
More informationProduct information Vibrating
Product information Level detection in bulk solids VEGAVIB 61 VEGAVIB 62 VEGAVIB 63 VEGAWAVE 61 VEGAWAVE 62 VEGAWAVE 63 Document ID: 29438 Contents Contents 1 Description of the measuring principle...
More information500 SERIES ADVANTAGES
K-FLO 00 SERIES Sizes -20 K-FL O B U T T E R F L Y V A L V E S 00 SERIES: SIZES -20 AWWA C0 Compiant he K-Fo 00 Series is a heavy-duty resiient seated butterfy vave ine in fu compiance with AWWA C0 for
More informationProduct information. Capacitive. Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69. Document ID: 29983
Product information Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69 Document ID: 29983 Contents Contents 1 Description of the measuring principle... 3 2 Type overview...
More informationPortable Compressors MOBILAIR M 52 / M 64 With the world-renowned SIGMA PROFILE Free air delivery 5.2 / 6.4 m³/min.
Portabe Compressors MOBILAIR M 52 / M 64 With the word-renowned SIGMA PROFILE Free air deivery / 6.4 m³/min www.kaeser.com Made in Germany KAESER s renowned MOBILAIR range of portabe compressors is manufactured
More informationAUTOMATIC MARINE AND RV TOILETS
AUTOMATIC MARINE AND RV TOILETS 1 THE INVENTOR, DESIGNER AND MANUFACTURER SINCE 1958, SFA SANIFLO IS THE WORLD S LEADER OF MACERATING TOILETS FOR THE MARINE AND RECREATIONAL VEHICLE INDUSTRIES Speciay
More informationPortable Compressors MOBILAIR M 52 / M 64 With the world-renowned SIGMA PROFILE Free air delivery 5.2 / 6.4 m³/min.
Portabe Compressors MOBILAIR M 52 / M 64 With the word-renowned SIGMA PROFILE Free air deivery / 6.4 m³/min www.kaeser.com Made in Germany KAESER s renowned MOBILAIR range of portabe compressors is manufactured
More informationThe Home of Control & Automation in Ireland. Monsoon
The Home of Contro & Automation in Ireand Monsoon Monsoon offers the most comprehensive range of premium quaity brass periphera pumps avaiabe on the market. Its wide range means that it is capabe of boosting
More informationPortable Compressors MOBILAIR M 36 / M 45 With the world-renowned SIGMA PROFILE Free air delivery 3.6 to 4.2 m³/min.
Portabe Compressors MOBILAIR M 36 / M 45 With the word-renowned SIGMA PROFILE Free air deivery 3.6 to m³/min www.kaeser.com Made in Germany KAESER s renowned MOBILAIR range of portabe compressors is manufactured
More informationThe Plug-In Connector. BEULCONNECT. For water and gas A11. made in Germany 2018.
2018.1 The Pug-In Connector. BEULCONNECT. For water and gas. --------------------------------------------------------- made in Germany A11 MINIMUM EFFORT. MAXIMUM EFFECT. The Pug-In Connector - A11 For
More informationOperating Instructions OPTISOUND 3020 C ma/hart - four-wire
Operating Instructions OPTISOUND 3020 C 4... 20 ma/hart - four-wire Contents Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symbolism used... 5 2 For your safety 2.1 Authorised
More informationThermal-Links (Thermal Cutoffs)
Pb-Free Cd-Free New Product Circuit Components Business Unit 401 Sadamasa-cho, Fukui City 910-82, Japan A0408-1 freecd-free Axicia Lead Radia Lead in-type Form Eectrica rating E series 2V 0.5A F series
More informationOperation Guide 3283
MO1104-EA Operation Guide 3283 About This Manua (Light) Depending on the mode of your watch, dispay text appears either as dark figures on a ight background or ight figures on a dark background. A sampe
More informationLevel detection in bulk solids. Vibration VEGAVIB VEGAWAVE Product Information
Level detection in bulk solids Vibration VEGAVIB 61-63 VEGAWAVE 61-63 Product Information Contents Contents 1 Description of the measuring principle...........................................................
More informationOperation Guide 3022
MO0912-EB Getting Acquainted Congratuations upon your seection of this CASIO watch. To get the most out of your purchase, be sure to read this manua carefuy. Appications The buit-in sensors of this watch
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationPRACTICAL APPLICATION OF STATIC HAZARD ASSESSMENT FOR DSEAR COMPLIANCE
PRACTICAL APPLICATION OF STATIC HAZARD ASSESSMENT FOR DSEAR COMPLIANCE Graeme R Eis, Senior Safety Consutant ABB Engineering Services, Daresbury Park, Daresbury, Warrington, Cheshire WA4 4BT, UK KEYWORDS:
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationHydrostatic. Continuous level measurement. Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 AL-EN
Hydrostatic Continuous level measurement 8 Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 187 Hydrostatic Level and pressure measurement Measuring principle The pressure
More informationProduct information. Capacitive. Level detection with bulk solids VEGACAP 62 VEGACAP 65 VEGACAP 66 VEGACAP 67. Document ID: 29982
Product information Level detection with bulk solids VEGACAP 62 VEGACAP 65 VEGACAP 66 VEGACAP 67 Document ID: 29982 Contents Contents 1 Description of the measuring principle... 3 2 Type overview... 5
More informationSafety Manual VEGAVIB series 60
Safety Manual VEGAVIB series 60 NAMUR Document ID: 32005 Contents Contents 1 Functional safety... 3 1.1 General information... 3 1.2 Planning... 4 1.3 Adjustment instructions... 6 1.4 Setup... 6 1.5 Reaction
More informationOperating Instructions VEGABAR 82. Pressure transmitter with ceramic measuring cell. Slave sensor for electronic differential pressure
Operating Instructions Pressure transmitter with ceramic measuring cell VEGABAR 82 Slave sensor for electronic differential pressure Document ID: 45050 2 Contents Contents 1 About this document 1.1 Function...
More informationSafety Manual OPTISWITCH series relay (DPDT)
Safety Manual OPTISWITCH series 5000 - relay (DPDT) 1 Content Content 1 Functional safety 1.1 In general................................ 3 1.2 Planning................................. 5 1.3 Adjustment
More informationOPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20
More informationQuick Reference. WARNING & l ALL RANGES CAN. Table of Contents:
@- A WARNING & ALL RANGES CAN TIP INJURY TO PERSONS COULD RESULT INSTALL ANTI-TIP DEVICE PACKED WITH RANGE SEE INSTALLATION INSTRUCTIONS Quick Reference Tabe of Contents: Pages 111 Before you start m piiziq
More informationKerk Lead-screw Assemblies: Lead-Screws Ø 1/8 to 15/16-in (3.2 to 23 mm)
Kerk -screw Assebies: -Screws Ø 1/8 to 15/16-in (3.2 to 23 ) Kerk -screws are anufactured fro 303 stainess stee and are produced with Kerk s excusive precision roing process. Kerk ead-screws are avaiabe
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationLevel switches Series LD Vibrating fork level switch for liquids and solids
Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or
More informationø40, ø50, ø63, ø80, ø100, ø125, ø140, ø160
Lock-up Cyinder Doube Acting, Singe Rod Series ø, ø, ø, ø, ø, ø, ø1, ø The series ock-up cyinder is a sef-ocking type that contains a ring that is tited by a spring force, which is further tited by the
More informationType 3709 Pneumatic Lock-up Valve. Translation of original instructions. Mounting and Operating Instructions EB 8391 EN
Type 3709 Pneumatic Lock-up Valve Translation of original instructions Mounting and Operating Instructions EB 8391 EN Edition July 2017 Note on these mounting and operating instructions These mounting
More informationElectropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationAQUAFIX Separators. The water treatment range. Modern separation technology for sustainable preservation of vital resources.
CIVILS LANDSCAPING AQUA SPORT AQUAFIX Separators The water treatment range. Modern separation technoogy for sustainabe preservation of vita resources. CIVILS LANDSCAPING AQUA SPORT The water treatment
More informationSupplementary instructions. Rod and cable components. for VEGAFLEX series 80. Document ID: 44968
Supplementary instructions Rod and cable components for VEGAFEX series 80 Document ID: 44968 Contents Contents 1 Product description 1.1 Extensions... 3 2 Mounting 2.1 General instructions... 6 2.2 Rod
More informationLevel switches Series LD Vibrating fork level switch for liquids and solids
Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant
More informationTechnical Data. Dimensions
00 Model Number Features mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
More informationGas services renewal programme
Customer information Gas services renewa programme gasnetworks.ie Introduction Gas Networks Ireand constructs and extends the natura gas network in Ireand to the highest safety standards. We deiver natura
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 2 mm
0102 Model Number Features 2 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-12 Quick mounting bracket with dead stop BF 12 Mounting flange, 12 mm Technical Data specifications Switching
More informationSports & Recreation Products
Sports & Recreation Products This brochure gives a simpified overview of our products for sports and recreationa use. More detaied photos, drawings in pdf and CAD format, specifications and Q.40s are avaiabe
More informationInstruction Manual Differential Pressure Transmitter
DE61 Instruction Manual Differential Pressure Transmitter Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance
More informationOperating Instructions VEGADIF 65
Operating Instructions VEGADIF 65 4 20 ma Document ID: 36236 Differential pressure Contents Contents 1 About this document 1.1 Function.................................. 4 1.2 Target group..............................
More informationTechnical Data. Dimensions
0102 Model Number Features 2 mm flush Usable up to SIL2 acc. to IEC 61508 Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 2 mm Installation flush Output
More informationTorque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
More informationHigh-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements
More informationDigital pressure gauge Model CPG500
Calibration technology Digital pressure gauge Model CPG500 WIKA data sheet CT 09.01 Applications Calibration service companies and service industry Measurement and control laboratories Quality assurance
More informationPressure Measurement Single-range transmitters for general applications
Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials
More informationCruzPro WSD110. Wind Speed/Direction Display with Data Logging functions
CruzPro WSD110 O Wind Speed/Direction Dispay with Data Logging functions Tabe of Contents Introduction............................ 3 Specifications........................... 4 Instaation.............................
More informationHow to specify a product. Process Sensors and Mechanical Instruments
How to specify a product Process Sensors and Mechanical Instruments Keep the overview. Here is some guideline information on how to specify our products. Intended as supplementary help to specification
More informationTechnical Data. General specifications. Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching
More informationSafety Manual VEGAVIB series 60
Safety Manual VEGAVIB series 60 Contactless electronic switch Document ID: 32002 Contents Contents 1 Functional safety... 3 1.1 General information... 3 1.2 Planning... 4 1.3 Adjustment instructions...
More informationLimit level measurement of bulk solids Vibration VEGAVIB VEGAWAVE Product Information
Limit level measurement of bulk solids Vibration VEGAVIB 61-63 VEGAWAVE 61-63 Product Information Content Content 1 Description of the measuring principle..................................................
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 5 mm
Dimensions M18x1 37 40 4 0102 24 LED Model Number Features 5 mm embeddable Usable up to SIL2 acc. to IEC 61508 Connection BN BU Accessories L+ L- EXG-18 Quick mounting bracket with dead stop BF 18 Mounting
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationData sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
More informationFloodlight LED. Series Operating instructions EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN
Floodlight LED Operating instructions Additional languages www.r-stahl.com Contents 1 General Information...3 1.1 Manufacturer...3 1.2 Information regarding the operating instructions...3 1.3 Conformity
More informationBULLETIN ENERVAC CORPORATION. Engineers and Manufacturers of AND
BULLETIN ENERVAC CORPORATION Engineers and Manufacturers of -- AND ENERVAC SEAL OIL Vacuum Purification System Dehydrates Fiters Purifies De Aerates Degasifies Miions of gaons of good grade turbo-compressor
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationDifferential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
More informationFloodlight LED. Series Operating instructions EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN
Floodlight LED Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information regarding the operating instructions...3
More informationDifferential pressure
Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor
More informationClimatic Independent Level Sensor LAR
1 Product Information LAR-361 LAR-761 Climatic Independent Level Sensor LAR Application / Specified usage Authorizations Hydrostatic level measurement in humid ambiance Special applicable for exterior
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 5 mm
00 Model Number Features 5 mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
More informationDigital pressure gauge Model CPG500
Digital pressure gauge Model CPG500 WIKA data sheet CT 09.01 for further approvals see page 3 Applications Calibration service companies and service industry Measurement and control laboratories Quality
More informationMounting and Operating Instructions EB 2172 EN. Series 43 Temperature Regulators. Type 43-5 and Type Type Type 43-6
Series 43 Temperature Regulators Type 43-5 and Type 43-7 Type 43-6 Type 43-6 Type 43-7 with flanged valve body, DN 32 to 50 Type 43-5 Type 43-7 with welding ends Mounting and Operating Instructions EB
More informationCertified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters
www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass
More informationVEGAVIB VEGAWAVE 61-63
Level detection of bulk solids Vibration VEGAVIB 61-63 VEGAWAVE 61-63 Product Information Contents Contents 1 Description of the measuring principle.... 3 2 Type overview.... 5 3 Mounting instructions...
More informationOperating Instructions VEGACAL 65
Operating Instructions VEGACAL 65 4 20 ma/hart two-wire Document ID: 30033 Capacitive Contents Contents 1 About this document 1.1 Function.................................. 4 1.2 Target group..............................
More informationbetter measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
More informationUltrasonic level transmitter and indicator
Ultrasonic level transmitter and indicator No contact with the product Compact design with polycarbonate housing (electronics and display). Remote display available on request Very good resistance in corrosive
More informationOperating Instructions Process pressure transmitter IPT-1* Vers metalic sensor Foundation Fieldbus
Operating Instructions Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor Foundation Fieldbus Contents Contents 1 About this document 1.1 Function.................................. 4 1.2 Target
More informationOperating Instructions
Operating Instructions Light-metal Ex d enclosures / flameproof enclosure > 8265/0 Empty enclosure > 8265/4 Control panel, integrated in Ex e enclosure > 8265/5 Control panel Table of Contents 1 Table
More informationOSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide
OSAT Series Intrinsically Safe Infrared Temperature Sensor Operator's Guide Issue L Jan 2017 Introduction OSAT Series intrinsically safe non-contact infrared temperature sensors measure the temperature
More informationMounting and Operating Instructions EB 3017 EN. Self-operated Regulators
Self-operated Regulars Flow and Differential Pressure Regular Type 42-37 Flow and Differential Pressure or Flow and Pressure Regular Type 42-39 Type 42-37 Type 42-39 Fig. 1 Flow and differential pressure
More informationE8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)
Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless
More informationVariable Displacement Pump (A)A10V Series-31
Variabe Dispacement Pump (A)A10V eries31 Industria & Mobie, inge & Thru haft Modes, A10V / AA10V 18, 28, 45, 71, 100 & 140 Variabe Dispacement Pump (A)A10V, eries 31 Features Axia piston pump A10V in swashpate
More informationUltrasonic. 58 Overview VEGASON 60 VEGASON 61, 62, 63
Ultrasonic 58 Overview VEGASON 60 VEGASON 61, 62, 63 57 Overview VEGASON Area of application The ultrasonic sensors of the VEGASON series are suitable for non-contact level measurement of liquids and bulk
More informationHBLT-A1 LIQUID LEVEL SENSOR
Instruction manual HBLT-A1 LIQUID LEVEL SENSOR for measuring liquid level in refrigerant vessels Instruction manual HBLT - A1 - Liquid level Transmitter (HBLT-A1-008-UK) 1 / 16 Contents Safety instructions...
More informationDM01. Please visit our website: Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
DM0 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationGerman / British / Japanese Medical Gas Outlets
S o utio ns for Life German / British / Japanese Medica Gas Outets 38X6 / 38X7 / 38X8 Coor-coded for easy gas service identification Moduar structure, convenient maintenance German (DIN) Gas Outet is CE
More informationIDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger
More informationProtection classes of electrical equipment belonging to group II
Technica Expanations Contro Soenoids in exposion-proof execution G XX E Contents Terms, definitions, expications Cassification of exposive atmospheres in zones and connection with eectrica equipment Ignition
More informationKERN EG/EW Version /02
E KERN EG/EW Version 1.5 07/02 Operating Instructions Electronic Precision Balances Contents 1 TECHNICAL DATA... 20 2 UNPACKING AND STANDARD ACCESSORIES... 23 3 SETTING UP THE BALANCE... 23 4 EXTERNAL
More informationUltrasonic. Continuous level measurement. Overview Page 64 VEGASON series 60 Page 66 AL-EN
Ultrasonic Continuous level measurement Overview Page 64 VEGASON series 60 Page 66 6 VEGASON Non-contact measurement with ultrasonics Measuring principle Short ultrasonic pulses in the range of 5 to 70
More informationSSR. Smart Valve Positioner.
Smart Valve Positioner Smartest valve control device meeting a dynamic performance and a precise setting with a piezoelectric technology and an optimized auto-calibration program Features Auto-Calibration
More information