Qarn Alam & Saih Rawl Hazard Hunt 8 th - 11 th April 2018

Size: px
Start display at page:

Download "Qarn Alam & Saih Rawl Hazard Hunt 8 th - 11 th April 2018"

Transcription

1 MSEM Partnership in HSE 2018 Top9 HSE exposures Hazard Hunt 1

2 Qarn Alam team Hazard Hunt Kick Off Meeting Kick Off Meeting 2

3 Qarn Alam Steam PDO Mechanical Crew Hazard Hunt Team Engagement Coaching Moments 3

4 Qarn Alam Steam PDO Mechanical Crew Hazard Hunt Team GOOD PRACTICE PTW Compliance Physical Isolation & Tagging

5 Hazards identified by PDO Mechanical Crew 5

6 Hazards identified by PDO Mechanical Crew 6

7 Hazards identified by PDO Mechanical Crew Falling Tripping hazards 7

8 Hazard identified by PDO Mechanical Crew House keeping Tripping Hazard

9 Qarn Alam Steam PDO Mechnical Crew Hazard Hunt Team Qarn Alam PDO Mechanical Crew Hazard Hunt Team 9

10 Al SAROOJ Hazard Hunt Team Engagement Coaching Moments 10

11 Al SAROOJ Hazard Hunt Team Engagement Coaching Moments 11

12 Hazard identified by Al SAROOJ Workshop team GOOD PRACTICE Chemical storage area Shaded/Secondary Containment /labeled/msds/spill Kit

13 Hazards identified by Al SAROOJ Workshop team Not in use slings not discarded potential of being re-used

14 Hazards identified by Al SAROOJ Workshop team Not fit for purpose Tipper Holder at Mechanical Workshop

15 Hazards identified by Al SAROOJ Workshop team Poor housekeeping Slipping/Tripping/Insects/Ergonomic and Fire Hazard

16 Hazards identified by Al SAROOJ Workshop team Poor housekeeping Over Reaching- Ergonomic/Slipping/Tripping/Insects and Fire Hazard

17 Hazard identified by Al SAROOJ Workshop team Poor housekeeping Slipping Tripping Insects and Fire Hazard Blocking Fire Extinguisher

18 Hazard identified by Al SAROOJ Workshop team Exposed y cables Electrical/Fire Hazard Hit object at height on walk way

19 Hazard identified by Al SAROOJ Workshop team Unsafe storage of tyres Exposed directly to the sun No proper stoppers/chock in place

20 Waste segregation not practiced by staff Qarn Alam & Saih Rawl Hazard identified by Al SAROOJ Workshop team

21 Hazard identified by Al SAROOJ Workshop team GOOD PRACTICE Coded area/ Signage and wheel chocks

22 Reversing parking area missing hard barrier/stopper Qarn Alam & Saih Rawl Hazards identified by Al SAROOJ Workshop team

23 Al SAROOJ Hazard Hunt Team Qarn Alam Al SAROOJ Workshop Hunt Team 23

24 Al SAROOJ & Sub-Contractor at site Hazard Hunt Team Qarn Alam Al SAROOJ & Sub-Contractor at site Hazard Hunt Team 24

25 Al SAROOJ & Sub-Contractor at site Hazard Hunt Team Engagement Coaching Moments Qarn Alam Al SAROOJ & Sub-Contractor at site Hazard Hunt Team 25

26 STS Workshop Hazard Hunt Team Engagement Coaching Moments 26

27 STS Workshop Hazard Hunt Team Engagement Coaching Moments 27

28 Hazards identified by STS Workshop Team Grinding wheel RPM inspection and condition Engagement on work station ergonomic and poster Grinding wheel RPM speed & physical condition Sharpe edges 28

29 Hazards identified by STS Workshop Team Fumes Fire Burns Work station Ergonomic and Poster insufficient PPE i.e. Apron 29

30 Hazards identified by STS Workshop Team Falling Tripping hazards Falling Tripping hazards 30

31 Hazards identified by STS Workshop Team Falling object Manual handling/poor Poster Pinch point 31

32 STS Workshop Hazard Hunt Team Qarn Alam STS & Sub-Contractor Hazard Hunt Team 32

33 Galfar Workshop Hazard Hunt Team Engagement Coaching Moments 33

34 Hazards identified by Galfar Workshop Hazard Hunt Team Pinch point on rolling pipes No Stopper 34

35 Hazards identified by Galfar Workshop Hazard Hunt Team Inadequate storage access blockage to the switch tripping hazard Inadequate storage access blockage to the switch tripping hazard Manual handling/poor Poster Pinch point 35

36 Hazards identified by Galfar Workshop Hazard Hunt Team Not in use/damaged Grinding wheel left at work station With a risk of reuse 36

37 Summary The Hazard Hunt (HH) programme was well received and fully supported by Qarn Alam Steam & Engineering team. kick off meeting (HH background, objective & deliverables) was attended by PDO : QA Stem TL, Site management, Engineers, Supervisors, Operators and Technician. Contractor :EMC (STS), ODC (Galfar), Al Sarooj and Al Haditha. Contractor : Site management, HSE personal, Civil, Electrical and Mechanical Supervisors. Observation; Galfar has a weekly HSE committee sites visits (i.e. HSE inspections) that was agreed to incorporate the HH programme within the programme. No significant major observation/ or findings was noted during the site visit exercises. Overall poor housekeeping at Al Sarooj Yard and workshops was a concern followed by the Galfar Welding workshop which reflects a poor safety culture induction at the Yard and workshop. Take away: Formalising of the HH programme for QA steam team, along with a replication of Galfar agreed programme across contractor committee. Site management to close out noted observation/ findings during the visit. Keep MSE posted of any updates and/ or support needed. 37

Harweel & Marmul Hazard Hunt 25 th -27 th Feb 2018

Harweel & Marmul Hazard Hunt 25 th -27 th Feb 2018 Harweel-HMPS & Marmul-MMPS Hazard Hunt 25 th 27 th Feb 2018 MSEM Partnership in HSE 2018 Top9 HSE exposures Hazard Hunt 1 HMPS, WPAI Civil Crew Hazard Hunt Team HMPS, WPAI Civil Crew Hazard Hunt Team Engagement

More information

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010) (Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Form Tool & Machine Work General Various (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed in safe operation of each

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information

Document: APA HSE GP Tx Version: 0.01 Date: 04/03/2013 Review by: 26/03/2014 Page 1 of 11 pages

Document: APA HSE GP Tx Version: 0.01 Date: 04/03/2013 Review by: 26/03/2014 Page 1 of 11 pages SAFE WORK METHOD STATEMENT WORKSHOP FABRICATION HSE NET NAT SWMS APAND00033 APT AM Holdings Pty. Ltd. [ABN] 95124754383 APA Group Principal Contractor (PC) Level 19, HSBC Building Subcontractor 580 George

More information

MSE CONTROLLED DOCUMENT. Radiological HSE Precautions for Pigging Operations

MSE CONTROLLED DOCUMENT. Radiological HSE Precautions for Pigging Operations MSE CONTROLLED DOCUMENT Radiological HSE Precautions for Pigging Operations Document No: Supersedes Revision no: 1 1/10/2004 Custodian: MSE Revision no: 1 1/10/2006 Filename: NORMMGT. DOC Administered

More information

MSE CONTROLLED DOCUMENT. Radiological HS&E Precautions for Dismantling Equipment

MSE CONTROLLED DOCUMENT. Radiological HS&E Precautions for Dismantling Equipment MSE CONTROLLED DOCUMENT Radiological HS&E Precautions for Dismantling Equipment Document No: Supersedes Revision no: 1 1/10/2004 Custodian: MSE/32 Revision no: 1 1/10/2006 Filename: NORMMGT. DOC Administered

More information

University College Dublin Machinery/Equipment Risk Assessment Template

University College Dublin Machinery/Equipment Risk Assessment Template 1. General Information Name of Person(s) carrying out assessment and their position Principal Investigator / Supervisor / Head of School or Unit (Person responsible for ensuring safety) Date of assessment

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description Substation aintenance D 10721527 Approved by anager, Work Practices Review team SWS Development Approval date October 2015 Qualifications/icences

More information

CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK

CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3

More information

Print this activity then complete it and keep it as evidence in your folder, or portfolio.

Print this activity then complete it and keep it as evidence in your folder, or portfolio. Workplace hazards Workplace Learning and Assessment Activity Workplace Learning and Assessment Activity Print this activity then complete it and keep it as evidence in your folder, or portfolio. Hazard

More information

Risk assessment. Assessment details. Task. Introduction. Please complete the form as fully and accurately as you can. Assessors job title

Risk assessment. Assessment details. Task. Introduction. Please complete the form as fully and accurately as you can. Assessors job title Risk assessment Introduction Please complete the form as fully and accurately as you can. Assessment details Name of organisation Assessor's name Assessors job title Any Company John Smith Manager Date

More information

This document provides guidance to conducting health and safety inspections at the University, to ensure Hazards are identified and controlled.

This document provides guidance to conducting health and safety inspections at the University, to ensure Hazards are identified and controlled. Health and Safety Guideline: HSG 10.1 Health and Safety Inspections and Testing 1. Purpose This document provides guidance to conducting health and safety inspections at the University, to ensure Hazards

More information

Safety Services Guidance. Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER)

Safety Services Guidance. Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER) Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER) Key word(s) : Work equipment. Using, maintaining and repairing. Information, instruction and supervision. Risk Assessment.

More information

Potential risk of injury to staff

Potential risk of injury to staff Register Fire, Earthquake - other Emergencies Manual Handling and Repetitive Work Repetitive, Forceful Work Poor Housekeeping Not Wearing PPE (Personal Protective Equipment) Potential risk of injury to

More information

Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11

Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11 Issue Date: Review Date: Page Number: 1 of 11 1. Hazard Management Details General Plant/Equipment Item: WOOD LATHE Make/Model No.: Serial No.: School: Work Location: Name of Person(s) Conducting Activity:

More information

TENDERER OCCUPATIONAL HEALTH AND SAFETY (OHS) MANAGEMENT SYSTEM QUESTIONNAIRE

TENDERER OCCUPATIONAL HEALTH AND SAFETY (OHS) MANAGEMENT SYSTEM QUESTIONNAIRE TENDERER OCCUPATIONAL HEALTH AND SAFETY (OHS) MANAGEMENT SYSTEM QUESTIONNAIRE This questionnaire forms part of the SANBI tender evaluation process and is to be completed by tenderers and submitted with

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work Method Statement Task details Description Install and Maintain V Overhead Equipment and Associated ardware (de-energised) DM 10716988 Approved by Manager, Work Practices Review

More information

Bitumen Delivery Driver Inductions Eurobitume UK

Bitumen Delivery Driver Inductions Eurobitume UK Bitumen Delivery Driver Inductions Eurobitume UK The information in this module is given in good faith and belief in its accuracy at the time of publication, but does not imply any legal liability or responsibility

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information

HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD

HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD Location: Company Wide Date of Assessment: 04 April 2017 Revision No.: 0 Description of planned work or activity: HIRA Register Attendees: see attached tool-box

More information

MSE CONTROLLED DOCUMENT. Radiological HS&E Precautions for NORM Contaminated Tanks, Vessels & Separators

MSE CONTROLLED DOCUMENT. Radiological HS&E Precautions for NORM Contaminated Tanks, Vessels & Separators MSE CONTROLLED DOCUMENT Radiological HS&E Precautions for NORM Document No: Supersedes Revision no: 1 Date:1/10/2004 Custodian: MSE/32 Revision no: 1 Date: 1/10/2006 Filename: NORMMGT. DOC Administered

More information

Contractor / Exhibitor Handbook

Contractor / Exhibitor Handbook Contractor / Exhibitor Handbook Health and Safety This booklet outlines the basic rules that must be followed by contractors and other visitors working on Live Promotions Events sites. The contractors

More information

CIVIL INFRASTRUCTURE HEALTH, SAFETY, AND ENVIRONMENT Describe protection of health, safety and environment in the civil infrastructure industry

CIVIL INFRASTRUCTURE HEALTH, SAFETY, AND ENVIRONMENT Describe protection of health, safety and environment in the civil infrastructure industry 1 of 8 level: 3 credit: 7 planned review date: October 2006 sub-field: purpose: Civil Works and Services This unit standard is a component of the selfregulation system for operations in the civil infrastructure.

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT PLAT HAZARD AD EQUIPMET RISK ASSESSMET Plant Identification : HAULOTTE OPTIMUM 8.1 Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or

More information

Activity Hazard Analysis. Final Review: Dr. R. Von Burg

Activity Hazard Analysis. Final Review: Dr. R. Von Burg Appendix C Activity Hazard Analysis Mobilization/ Demobilization Physical injury from heavy equipment; heavy lifting, pinch points; slip, trip, and fall hazards Brush Clearing Cuts, slashes, dismemberment.

More information

Safe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN

Safe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN JOB NO: PROJECT: DATE: 1/1/2018 SWMS NO: SWMS 001.1 PREPARED BY: LUKE BLINCO REVISED BY: ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: MINIMUM PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIREMENTS

More information

HAZARD RECOGNITION EVALUATION and CONTROL

HAZARD RECOGNITION EVALUATION and CONTROL What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.

More information

SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030

SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030 SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030 HIGH RISK APT AM Holdings Pty. Ltd. [ABN] 95124754383 Principal Contractor (PC) APA Group Level 19, HSBC Building 580 George

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description Transmission Tower Work D 10696821 Approved by Work Practices anager Review team SWS Development Approval date October 2015 Qualifications

More information

Lockout / Tag out Program

Lockout / Tag out Program Lockout / Tag out Program Presented by DOSHTI www.doshti.com You will learn Purpose of Lockout- Tag out Requirements for LOTO Types of Hazardous Energy Procedures for LOTO The OSHA Standard for the Control

More information

CLUB RISK ASSESSMENT TEMPLATE

CLUB RISK ASSESSMENT TEMPLATE CLUB / VENUE (Guidance for clubs to adapt for their own use) 1. ALL AREAS Slips, trips and falls injury from slips trips and falls from uneven or damaged surfaces, holes etc. External ground surfaces,

More information

PLANT RISK ASSESSMENT

PLANT RISK ASSESSMENT PLANT RISK ASSESSMENT Forktruck: Year of Manufacture Make: Model: Serial : TCM FD30T3 Attachment: Name: Mfg: Model : Owner: Business/Organisation: Address: This header page and the following 5 pages have

More information

There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.

There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively. OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There

More information

Date Issued: January 2012 Revision Date: December 2012 Review Date: December 2015 Revision #

Date Issued: January 2012 Revision Date: December 2012 Review Date: December 2015 Revision # SUNCOR ENERGY PRODUCTS DISTRIBUTION TERMINAL OPERATING MANUAL STANDARD OPERATING PROCEDURE MAINTENANCE TASKS Date Issued: January 2012 Revision Date: December 2012 Review Date: December 2015 Revision #

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT PLAT HAZARD AD EQUIPMET RISK ASSESSMET Plant Identification : HAULOTTE STAR 10 Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or struck

More information

CONTRACTOR SAFETY INDUCTION HANDBOOK

CONTRACTOR SAFETY INDUCTION HANDBOOK CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number

More information

Kennards Hire Building I, 22 Powers Road Seven Hills. NSW 2147

Kennards Hire Building I, 22 Powers Road Seven Hills. NSW 2147 Safety Audit / Risk Assessment Of Hino 2 Tonne Dutro Tipper Kennards Hire Building I, 22 Powers Road Seven Hills. NSW 2147 Mark Zimmer Unit 3, 16 Herbert St, Equipment manager Artarmon. NSW 2064 Ph: (02)

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description Transmission conductor stringing D 10696968 Approved by Work Practices anager Review team SWS Development Approval date October 2015 Qualifications/icences

More information

Western Sydney University Safety Inspection Checklist - Laboratory Environments

Western Sydney University Safety Inspection Checklist - Laboratory Environments Western Sydney University Safety Inspection Checklist - Laboratory Environments Useful Hint: To maximise the benefits that can be gained from a workplace inspection activity read the Western Sydney University

More information

Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS

Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives

More information

SITE SAFETY SUPERVISOR (SSS)

SITE SAFETY SUPERVISOR (SSS) SITE SAFETY SUPERVISOR (SSS) 1.0 OBJECTIVE At the end of the course, the participant will be able to: Describe the OSH legislative requirements pertaining to construction site; Conduct the risk management

More information

Risk Assessment Form

Risk Assessment Form Assessment Form Oil Salvage Limited Assessment Record Activity: Loading of tankers (Collection and Deliveries) Ref Number: RA03 Having assessed the and risks, I believe that if the control measures identified

More information

Procedure: Permit Activities-Work in Confined Spaces and Hot Works

Procedure: Permit Activities-Work in Confined Spaces and Hot Works Procedure: Permit Activities-Work in Confined Spaces and Hot Works 1. Purpose Provide a safe working environment when working in confined spaces or whilst performing hot works in any GSCC building. 2.

More information

Safety Risk Assessment Roofing Works / Surveying / Inspections

Safety Risk Assessment Roofing Works / Surveying / Inspections One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 One Direct Operatives accessing roof

More information

SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT

SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT Prepared for:- Date:- Work Scheduled:- SCOPE OF WORK Carry out installation of flow meters / pressure sensors. Installation of flow meter procedure

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Current Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed in safe operation of each tool/machine.

More information

Date Issued: November 2011 Revision Date: December 2012 Review Date: December 2015 Revision #

Date Issued: November 2011 Revision Date: December 2012 Review Date: December 2015 Revision # SUNCOR ENERGY PRODUCTS DISTRIBUTION TERMINAL OPERATING MANUAL STANDARD OPERATING PROCEDURE MAINTENANCE TASKS Date Issued: November 2011 Revision Date: December 2012 Review Date: December 2015 Revision

More information

STABLESAFE TRAINERS AUDIT TOOL

STABLESAFE TRAINERS AUDIT TOOL STABLESAFE TRAINERS AUDIT TOOL Name Address Date Postcode To assist stables in managing OH&S requirements trainers are encouraged to complete this stable audit tool. This audit is designed to help identify

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT Plant Identification : HAULOTTE LIGHT BOOMS 3522A (HTA 13P); 4527A (HTA 16P); 5533A (HTA 19P) and 3632T (HTT 13) Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking

More information

Job Safety & Environment Analysis

Job Safety & Environment Analysis Job Safety & Environment Analysis To be used when the risk is greater than LOW and / or Defined Hazardous Work and there is no standard procedure for the task. All sections of this JSEA form must be completed.

More information

Safe Work Method Statement Transmission Field Protection Services

Safe Work Method Statement Transmission Field Protection Services Safe Work Method Statement Transmission Field Protection Services Purpose Permits Authorisations Training Equipment Fault finding on live V changeover/distribution boards N/A Electrical worker s licence,

More information

Work Health & Safety Inspection Checklist Office Environment

Work Health & Safety Inspection Checklist Office Environment Work Health & Safety Inspection Checklist Office Environment Inspection Team Members: Manager / Supervisor of Area: Name of person completing the checklist: Building: Building Level: Inspection : Instructions

More information

B S Glass Ltd Safety procedures- outsourced Workplaces

B S Glass Ltd Safety procedures- outsourced Workplaces B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission

More information

Control of Hazardous Energy Lockout / Tagout Program

Control of Hazardous Energy Lockout / Tagout Program Control of Hazardous Energy Lockout / Tagout Program August 2016 Table of Contents Purpose... 1 Scope and Application... 1 Responsibilities... 1 Environmental Health and Safety Personnel (EH&S)... 1 Directors

More information

Hazards Requiring Attention: AS AT Friday, 1 April Next Review Saturday, 1 April Total Hazards Recorded 43. Critical Risk Hazards 0

Hazards Requiring Attention: AS AT Friday, 1 April Next Review Saturday, 1 April Total Hazards Recorded 43. Critical Risk Hazards 0 EF26 Risk Assessment Kubota U35-4 s Requiring Attention: AS AT Friday, 1 April 2016 0 Next Review Saturday, 1 April 2017 Total s Recorded 43 Critical Risk s 0 High Risk s 0 Moderate Risk s 10 Low Risk

More information

FLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE

FLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE JOB NO: PROJECT: DATE: SWMS NO: SWMS 002 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: STUMP REMOVAL SUPERVISED BY: REVISION DATE: April 2016 MINIMUM PERSONAL PROTECTIVE EQUIPMENT

More information

Compliance Requirements

Compliance Requirements Compliance Requirements The compliance requirements for OSHA s Personal Protective Equipment regulations are very straightforward, and logical. GENERAL REQUIREMENTS (29 CFR 1910.132) The general OSHA Personal

More information

BSO Plus ANNUAL SAFETY REFRESHER 2015

BSO Plus ANNUAL SAFETY REFRESHER 2015 The BSO Plus Safety Refresher is an annual checkpoint designed from the content in BSO Plus. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure

More information

MONTHLY SAFETY NEWSLETTER

MONTHLY SAFETY NEWSLETTER CONTACT ELECTRIC SAFETY NEWSLETTER FOR ENSURE ALL EMPLOYEES AND SUB-CONTRACTORS WORKING FOR AVALANCHE ACID REVIEW THIS NEWSLETTER. IT IS A KEY PART OF OUR SAFETY PROGRAM DECEMBER 2017 VOL.12 MONTHLY SAFETY

More information

BIOSAFETY SELF AUDIT PRINCIPAL INVESTIGATOR/PERMIT HOLDER: CONTAINMENT LEVEL: 1 2 (Shaded) RISK GROUP: 1 2 AUDIT TO BE COMPLETED BY (DATE):

BIOSAFETY SELF AUDIT PRINCIPAL INVESTIGATOR/PERMIT HOLDER: CONTAINMENT LEVEL: 1 2 (Shaded) RISK GROUP: 1 2 AUDIT TO BE COMPLETED BY (DATE): Page 1 of 5 BIOSAFETY PROGRAM BIOSAFETY SELF AUDIT PRINCIPAL INVESTIGATOR/PERMIT HOLDER: SELF AUDIT COMPLETED BY: LABORATORY ROOM NUMBER: CONTAINMENT LEVEL: 1 2 (Shaded) RISK GROUP: 1 2 DATE OF AUDIT:

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description igh Voltage (V) etering Installation Commissioning D 10643700 Approved by Work Practices Development anager Review team SWS Development

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description High Voltage Testing D 10697056 Approved by Work Practices anager Review team SWS Development Approval date ay 2013 Qualifications/icences

More information

HEALTH AND SAFETY METHOD STATEMENT AIR CONDITIONING/REFRIGERATION MAINTENANCE/SERVICE. 2. Clean filters and screens when necessary

HEALTH AND SAFETY METHOD STATEMENT AIR CONDITIONING/REFRIGERATION MAINTENANCE/SERVICE. 2. Clean filters and screens when necessary HEALTH AND SAFETY METHOD STATEMENT AIR CONDITIONING/REFRIGERATION MAINTENANCE/SERVICE Air Conditioning Indoor/Outdoor Unit as applicable 1. Check Pressures 2. Clean filters and screens when necessary 3.

More information

Total s Golden rules

Total s Golden rules Total s Golden rules Golden rule No. 12: Simultaneous operations or co-activities This presentation resumes in part the document that won an award at the 2011 World Day for Safety at work, written by:

More information

Product Risk Assessment

Product Risk Assessment Product Risk Assessment Flextool (Aust.) Pty Ltd, Brunswick, Vic. Product Description Artizan ub Floor Grinder Model Number ART-UB Risk Assessment Date 19-Jun-08 Product Risk Assessment Number 0010 PRA

More information

Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028. Name Date Signature. Author Jarred Hearle 30/11/2014. Reviewed John Nulty 30/11/2014

Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028. Name Date Signature. Author Jarred Hearle 30/11/2014. Reviewed John Nulty 30/11/2014 Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028 Name Date Signature Author Jarred Hearle 30/11/2014 Reviewed John Nulty 30/11/2014 Approved Geoff Selfe 01/12/2014 Key Safety Acts Complete a 5

More information

CONTRACT MANAGEMENT Document 10a: Guideline for Job Safety Assessments

CONTRACT MANAGEMENT Document 10a: Guideline for Job Safety Assessments CONTRACT MANAGEMENT Document 10a: Guideline for Job Safety Assessments Last Update: 30 September 2009 Owner: Manager OHS 1. Introduction The Contract Manager is responsible for reviewing Job Safety Assessments

More information

WORK METHOD STATEMENT STRUCTURAL STEEL

WORK METHOD STATEMENT STRUCTURAL STEEL ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone

More information

Laboratory Safety Training. Environmental Health and Safety

Laboratory Safety Training. Environmental Health and Safety Laboratory Safety Training Environmental Health and Safety Why You Need Lab Safety Training Hazardous materials and/or equipment. You need to understand the risks and how to mitigate them. OSU requires

More information

Safe Work Method Statement Transmission Field Protection Services

Safe Work Method Statement Transmission Field Protection Services Purpose Permits Authorisations Training Equipment Electrical Access Permit (EAP) or Sanction to Test (STT) Electrical worker s licence, Network Authority Card (NAC), Recipient in charge (RIC), Tester in

More information

Rockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS

Rockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS Business Procedure Hot Work Document Number OHS-PROC-128 This document applies to the following sites: All Sites Rockhampton Office Brisbane Office Tarong Site Barron Gorge Hydro PS Kareeya Hydro PS Mica

More information

WHS record keeping - general (Local areas responsible for keeping these records)

WHS record keeping - general (Local areas responsible for keeping these records) WHS record keeping - general (Local areas responsible for keeping these records) Records Examples Retention period Records relating to risk assessment and management of hazards (except particular requirements

More information

Petroleum Development Oman LLC MSE Q1 LTI Incident Analysis Study

Petroleum Development Oman LLC MSE Q1 LTI Incident Analysis Study Petroleum Development Oman LLC MSE3 2017-Q1 LTI Incident Analysis Study 1 P a g e Contents 1. Summary... 3 2. Analysis... 3 2.1. Directorates Analysis... 3 2.1.1. Directorate Breakdown YTD:... 3 2.1.2.

More information

Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041. Name Date Signature. Author Geoff Selfe 25/01/2016. Reviewed Solomon Site 25/01/

Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041. Name Date Signature. Author Geoff Selfe 25/01/2016. Reviewed Solomon Site 25/01/ Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041 Name Date Signature Author Geoff Selfe 25/01/2016 Reviewed Solomon Site 25/01/2016 ----- Approved Michael Garkaklis 25/01/2016 Key Safety Acts Complete

More information

JOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible)

JOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible) Page 1 of 6 How to use the Assessment Charts 1. Determine the Likelihood on the Qualitative Assessment Process Chart (pick a letter applicable to the task). 2. Determine the Consequence on the Qualitative

More information

Plant Hazard Identification and Risk Assessment

Plant Hazard Identification and Risk Assessment Plant information Plant item: Water Truck Plant identification details (asset/plant no.): Project: Competency required to operate the plant: MR/HR Licence / VOC List all legislation, codes of practice

More information

Safety Risk Assessment Hand and Power Tools

Safety Risk Assessment Hand and Power Tools One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 Use of hand and power tools B Contractors/Sub

More information

P N J CLEANERS LTD. Ventilation only Risk Assessments and Method Statements

P N J CLEANERS LTD. Ventilation only Risk Assessments and Method Statements Church Farm Wychor, Alrewas, Burton on Trent, Staffordshire. DE13 8BY P N J CLEANERS LTD Telephone 01283791953 Mobile 07585127242 Email admin@pnjcleaning.co.uk Ventilation only Risk Assessments and Method

More information

Laboratory Inspection Checklist

Laboratory Inspection Checklist Date: Time: Inspector(s): Laboratory Information Department Principal Investigator (PI)/Laboratory Instructor PI telephone number PI e-mail address Building Laboratory room number(s) Backup Safety Contact

More information

Appendix A: Induction check list

Appendix A: Induction check list Appendix A: Induction check list Name This checklist is to be completed as part of inducting a new user in the Laboratory. Permission to begin work in the Laboratory will only be given once all relevant

More information

Risk Assessment. Appendix A contains

Risk Assessment. Appendix A contains Risk Assessment Department The Cockpit Risk Assessment number AM/09/01 Date. 1 st July 01 Review due date 0 th July 01 Activity Maintenance and support service working Location The Cockpit Name of Assessor/s

More information

WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST

WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST Windmill Hazard Inspection Checklist WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST Authorised by: LOCATION OF INSPECTION...... Inspected By (1)........... (2)..... PRINT PRINT Signature (1):. (2)....

More information

Plant hazard checklist

Plant hazard checklist 110797 VWA PlantHazard Cvr 21/11/05 10:28 AM Page 1 Plant hazard checklist Some of the questions you should ask to help identify hazards arising from plant WorkSafe Victoria is a division of the Victorian

More information

Western Power Safe Work Method Statement Task details

Western Power Safe Work Method Statement Task details Western Power Safe Work ethod Statement Task details Description Cable Pitch Removal D 10715491 Approved by anager, Work Practices Review team SWS Development Approval date October 2015 Qualifications/icences

More information

WHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS)

WHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS) WHS 017 - WHS 017 Hazard Register - Version 5.0 April 20 Doc No: WHS 017 Effective Date: 04/04/20 1 WORKING WITH EARTHMOVING PLANT/ TRUCKS/SITE VEHICLES COLLISIONS OTHER PLANT EQUIPMENT SITE VEHICLES PERSONNELL

More information

Personal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9

Personal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9 Procedure No.: SOP-0147 Page: 1 of 9 1. PURPOSE This procedure describes the minimum requirements concerning personal protective equipment for personnel who are exposed to areas or tasks where hazards

More information

What is an induction? Contribute to OH&S Processes

What is an induction? Contribute to OH&S Processes What is an induction? Session 2 Contribute to OH&S Processes Types of Induction New Employee Induction Site Inductions Equipment Inductions Activity 2.1 Induction Description What is a Hazard? Session

More information

RISK MANAGEMENT. Siobhan Mulvenna, GIOSH, FCIPD

RISK MANAGEMENT. Siobhan Mulvenna, GIOSH, FCIPD RISK MANAGEMENT Siobhan Mulvenna, GIOSH, FCIPD www.smt-solutions.com What is Risk Assessment? Like any other area of your business, health and safety needs to be properly managed. To do this you need to

More information

Module: Permit to work System

Module: Permit to work System Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and

More information

PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT)

PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) WAC Page 296-307-320 Control of hazardous energy (lockout-tagout). 1 296-307-32001 What does this section cover? 1 296-307-32003 When does this section

More information

Safety Risk Assessment Carpentry

Safety Risk Assessment Carpentry One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 General carpentry activities including,

More information

Temporary load-bearing support for structural alterations or repairs

Temporary load-bearing support for structural alterations or repairs CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal

More information

UGRacing Formula Student Garage Risk Assessment

UGRacing Formula Student Garage Risk Assessment UGRacing Formula Student Garage Risk Assessment University of Glasgow School of Engineering Location: Formula Student Workshop Building: Rankine Building, Oakfield Avenue Glasgow G12 8LT Summary of activities

More information

WORK METHOD STATEMENT CARPET LAYING

WORK METHOD STATEMENT CARPET LAYING ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone

More information

Wilkins Safety Group

Wilkins Safety Group Gas Welding INTRODUCTION Welding is the union of pieces of metal by fusing the opposing surfaces that have been made molten by heat. Processes similar to welding include brazing and soldering. Allied processes

More information

DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM

DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Introduction 2 Regulatory Requirements 2 Protective Materials

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT Plant Identification : HAULOTTE HA16RTJ Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or struck by moving objects due to: Risk es

More information

Activity Hazard Analysis (AHA) Activity/Work Task: New Ductwork Installation Overall Risk Assessment Code (RAC) (Use highest code) M

Activity Hazard Analysis (AHA) Activity/Work Task: New Ductwork Installation Overall Risk Assessment Code (RAC) (Use highest code) M Activity Hazard Analysis (AHA) Activity/Work Task: New Ductwork Installation Overall Risk Assessment Code (RAC) (Use highest code) Project Location: NCO Academy Building 5518 JBDL Contract Number: W912QR-12-C-0074

More information

Contractor handbook. Purpose

Contractor handbook. Purpose Page no: 1 / 6 Contractor handbook Purpose Mitie aims to ensure that the highest levels of performance are achieved by all persons working for us or on our behalf. We require the same level of performance

More information