Mechanical Drawings POS-Line 17.3 (438.2 mm)
|
|
|
- Aubrey Hamilton
- 5 years ago
- Views:
Transcription
1 Mechanical rawings POS-Line 7. (8. ) Revision.9.7 ata isplay Group
2 ,8 8 7,,,,, ( 9, ) ( 8 ) 9, (chassis outline) 8 (bezel opening),8 (active area) 9,, 8,, (chassis outline) 8, (bezel opening) 8,9 (active area),, 8 VES MIS-E x (M max. depth,),8 (,8 ) 8, ( 8, ) etail-rawing Mounting racket 9 7,7 7, (8x) R, Optionen "Schutzglas" (S-9-9) und "Touch" (S-9-7) haben keine uswirkungen auf ußenmaße! OPTIONS "PROTETIVE GLSS" (S-9-9) N "TOUH" (S-9-7) HVE NO EFFET ON EXTERNL IMENSIONS! nsteuerung ontrol IQ ore-i IQ ore-i7 IQ tom STTUS estellnuer Grundmodul ORER NO. SI MOUL S-9-77 Prisma Media EO S-9-77 VideoPoster S S-9-89 HNGES ESIGN HEKE PPROVE atum TE atum TE NME.. tr R. Varianten "core-i" gelöscht.7.7 R. Version ergänzt..7 R. Erstausgabe / ST ISSUE.. NME IMENSION: ORER NO.: eschreibung / ESRIPTION Mechanical imensions POS-Line 7," open frame (Video PME / VideoPoster / / IQ tom) ST NGLE PROJETION Zeichnungsnuer: RWING NO: Zul. bw. GENERL LIMITS IN ISO 78-mk POS7-_R. EZEL FRONTPLTE TRUE-FLT-GLSS istec GmbH, Werk Germering ugsburger Str., 8 Germering Tel.:89/89- Fax.: - latt
3 99, (frame outline),8 (opeing),8 (active area), (bezel outline),8 (bezel opening),8 (active area) 99, (glass outline),8 (viewing area),8 (active area) EZEL TRUE-FLT-GLSS/TRUE-FLT-TOUH 9, (bezel outline) 8,8 (bezel opening) 8,9 (active area) R7 (x), (glass outline) 8,8 (viewing area) 8,9 (active area), R7 (x) FRONTPLTE, (frame outline) 8,8 (opening) 8,9 (active area) 9,,7 Optionen "Schutzglas" (S-9-9) und "Touch" (S-9-7) haben keine uswirkungen auf ußenmaße! OPTIONS "PROTETIVE GLSS" (S-9-9) N "TOUH" (S-9-7) HVE NO EFFET ON EXTERNL IMENSIONS! nsteuerung ontrol IQ ore-i IQ ore-i7 IQ tom R. Erstausgabe / ST ISSUE STTUS estellnuer Grundmodul ORER NO. SI MOUL S-9-77 Prisma Media EO S-9-77 VideoPoster S S-9-89 HNGES ESIGN HEKE PPROVE atum TE atum TE NME.. tr.. NME IMENSION: ORER NO.: eschreibung / ESRIPTION Mechanical imensions POS-Line 7," with Options ST NGLE PROJETION Zeichnungsnuer: RWING NO: Zul. bw. GENERL LIMITS IN ISO 78-mk POS7-Options_R. EZEL FRONTPLTE TRUE-FLT-GLSS TRUE-FLT-TO. S-9-79 S-9-7 S-9-7 S-9-79 istec GmbH, Werk Germering ugsburger Str., 8 Germering Tel.:89/89- Fax.: - latt
4 ,, (frame outline),8 (opening),8 (active area), FRONT PLTE RKMOUNT 8, (frame outline) 8,8 (opening) 8 8,9 (active area), Optionen "Schutzglas" (S-9-9) und "Touch" (S-9-7) haben keine uswirkungen auf ußenmaße! OPTIONS "PROTETIVE GLSS" (S-9-9) N "TOUH" (S-9-7) HVE NO EFFET ON EXTERNL IMENSIONS! nsteuerung ontrol IQ ore-i IQ ore-i7 IQ tom R. Erstausgabe / ST ISSUE STTUS estellnuer Grundmodul ORER NO. SI MOUL S-9-77 Prisma Media EO S-9-77 VideoPoster S S-9-89 HNGES ESIGN HEKE PPROVE atum TE atum TE NME.. tr.. TR NME IMENSION: ORER NO.: eschreibung / ESRIPTION Mechanical imensions POs-Line 7," Front Plate Rackmount ST NGLE PROJETION Zeichnungsnuer: RWING NO: Zul. bw. GENERL LIMITS IN ISO 78-mk POS7-Rackmount_R. EZEL FRONTPLTE TRUE-FLT-GLSS RKMOUNT istec GmbH, Werk Germering ugsburger Str., 8 Germering Tel.:89/89- Fax.: - S-9-79 latt
5 , 8, 9,8 8,,7 8,9 9,8,, 8,,,,,,,8 7, 88,9,8,8 9,7, 8, 8,,,, 8,,,8 7,8 99,8, 7,, 8, 8,,,, 8,,, Video Prisma Media EO OS-Keypad VideoPoster / OS-Keypad,, IQ tom ntenna WLN (Option) rightness ontrol,, nsteuerung ontrol IQ ore-i IQ ore-i7 IQ tom estellnuer Grundmodul ORER NO. SI MOUL S-9-77 Prisma Media EO S-9-77 VideoPoster S S-9-89 ESIGN HEKE PPROVE atum TE NME.. tr IMENSION: ORER NO.: eschreibung / ESRIPTION Zeichnungsnuer: RWING NO: POS-Line 7," onnections POS7-ON_R. EZEL FRONTPLTE TRUE-FLT-GLSS R. Varianten "core-i" gelöscht.7.7 R. Umstellung auf rtista Media III..7 R. Erstausgabe / ST ISSUE.. STTUS HNGES atum TE NME ST NGLE PROJETION Zul. bw. GENERL LIMITS IN ISO 78-mk istec GmbH, Werk Germering ugsburger Str., 8 Germering Tel.:89/89- Fax.: - latt
Mechanical Drawings POS-Line 17.3 (438.2 mm)
Mechanical rawings POS-Line 7. (8. ) Revision. Oct. ata isplay Group www.datadisplay-group.com ,8 8 7,,,,, ( 9, ) ( 8 ) 9, (chassis outline) 8 (bezel opening),8 (active area) 9,, 8,, (chassis outline)
IN-LINE CHECK VALVES CIT-02 / 03 / 06 / 10 (1/4,3/8,3/4,1-1/4) RIGHT ANGLE CHECK VALVES CRT / CRG-03 / 06 / 10 (3/8,3/4,1-1/4)
IN-LIN HK VLVS IT- / 3 / / (/,3/8,3/,-/) RIGHT NGL HK VLVS RT / RG-3 / / (3/8,3/,-/) Up to 5 MPa (33 PSI), 3 L/min (33 U.S.GPM) Pub. - IRTIONL ONTROLS These valves allow free flow in one direction and
Holder Assembly. Assembly. 1 MCP bottom holder. 2 MCP top holder 3 Clip. 9.5x9.5x0.4 1 lbf. Weight: 0.32 lbs. Allen Zhao
Holder ssembly ssembly 9.5x9.5x0. lbf MP bottom holder Weight: 0. lbs MP top holder lip llen Zhao Sheet Metal inder top spring clamp spacer inding for mm edge llen Zhao FE of MP Load:.: 5G Max on the plane
Products no longer available
Technical ata sheet R7..R Open-close ball valves, 3-way, with flange PN 6 for open an close col an warm water systems for switching functions on the water sie an 2-point controls in air-hanling an heating
Products no longer available
Technical ata sheet R7..R haracterize control valves, 3-way, with flange PN 6 for open an close col an warm water systems for moulating control on the water sie of air-hanling an heating systems air bubble-tight
7500 Series Heavy Duty Precision Ground Radial Bearings
7500 Series eavy uty Precision roun Raial earings PREISIO ROU O OTT SURES, SIIR TO TE 600 SERIES ERIS ESY TO USE I I E SIOS EIU OS X SPEE RE - 5000-6000 RP TROU REE ERI STEE RETIER ESI YO RETIER STR OUE
MISSISSIPPI RIVER SPILLWAY PLAN (2013 FLOOD RECOVERY) MISSISSIPPI RIVER SPILLWAY PROFILE (2013 FLOOD RECOVERY) C-200 PROJECT BOUNDARY
c:\pw_working\mvr\b5eddlh\d032060\_-200xxx.dgn $TE$ 5E 9:6:5 M N 37+00 372+00 373+00 37+00 PO N 3397.37 E 23639.0 535.90 537.6 535.8 535.27 535.2 535.07 H:V 50H:V 375+00 5H:V 376+00 5H:V H:V 3H:V PROJET
Bollard Post, Model R-8902
ollard Post, Model R-80 Removable Receiver with Lid (for detail, see sheet of ) Removable Receiver with hain (for detail, see sheet of ) Fixed Embedded Mount (for detail, see sheet of ) Flanged Surface
Instructions for Continued Airworthiness
Instructions for ontinued irworthiness Grizzly law Ski rag ocument No. F00I ircraft Serial Number: ST Number: S0K These Instructions for ontinued irworthiness shall be included in the airplane Maintenance
Compressed Air Filtration
ilter for high pressure MAIN EATURES & ENEITS: Innovative iltration technology, high retention rate, low pressure loss ilter housing made of aluminium resp. steel, designed for operating pressure up to
LOT 2 PEDRICK-ECKERD FILING NO. 3
SITE WG NO. RWING TITLE LOT PERIK-EKER FILING NO. 67 SEURITY LV OLORO SPRINGS, O 809 OF TITLE SHEET OF EVELOPMENT PLN OF EVELOPMENT ETILS OF PRELIMINRY UTILITY N PULI FILITY PLN OF PRELIMINRY GRING PLN
ENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
LS3L-R-D. Litespeed MOD 3 LED Recessed Slot. Ordering Guide. Key Features. Performance LITESPEED LS3L-R-D. Fixture Type: Project Name:
Fixture Type: Project Name: Litespeed MO LE Recessed Slot Ordering Guide Feature ode Options escription Series L MO Mounting W rywall PT rywall with plaster trim LG / Grid NG 9/ Grid SS 9/ Screw Slot &
XML Electromechanical Pressure Switches
Selection Guide Industrial Switches Type of installation ontrol circuits Applications Media controlled Type of operation Air, water, hydraulic oils, corrosive fluids, viscous products Fixed differential:
EXAMPLE 1 PAGE: 1 Instrument type PBX100LA 3 2 Pressure range bar 55 3 Electrical device I-1-Hz contact 61 4 Any options Blow-out plug 57-58
GENERL INFORMTION This specification document is for pressure gauges manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. STIKO is a manufacturer of mechanical instruments in the area
Kameleon Glazed Natural & Smoke Ventilator. Smoke Control
Kameleon Glazed Natural & Smoke Ventilator Smoke ontrol Kameleon Kameleon is an attractive, low profile, thermally broken glazed ventilator, which is primarily designed for smoke control applications.
Heavy Duty Pocket Insets for the Oil & Gas Industry
ata sheet S/I N Rev. eavy uty Pocket Insets Spare connection heads, extensions and measuring insets for resistance thermometers and thermocouples Thermometers in this range have been designed for use with
AIR TREATMENT FRL Series FUTURA. The New FUTURA Series offers many advantages:
IR TRETMENT FRL Series FUTUR The Futura series: the future is built in! Innovative, compact and highly efficient, the Futura series is an absolute technical highlight. The modular structure of the patented
RECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
Pressure Control (and Check) Valve
Pressure ontrol (and heck) Valve PRSSUR OTRO (A ) VAV 50 to 80l/min 4Pa eatures qthis circuit control valve works as a sequence valve, unloading valve, and counter balance valve. waximum operating pressure
VFPIP/VFPIM/VFPI 15-25
VFPIP/VFPIM/VFPI N 15-25 revision 12 2016 VFPIP/VFPIM/VFPI 15-25 Pressure independent control valves, N15-N25 with integrated flow limiter for thermal emitters and differential pressure regulator VFPIP/VFPIM/VFPI
RP series Rotor Pumps
ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting
Bladder Accumulators. General Information. Bladder Accumulators. Introduction. Accumulator Function. Why use a Bladder Accumulator?
General Information Introduction Accumulator unction Bladder accumulators provide a means of regulating the performance of a hydraulic system. The design of the Stauff bladder accumulator makes use of
Mark 608. Gas Pressure Regulators. Pressure Regulators Mark 608 Gas Pressure Regulators SPECIFICATIONS (3/4-1-1/4 ) FEATURES 3/4-1-1/4
Mark Gas Pressure Regulators 3/4-1-1/4 The MK Gas Pressure Regulator is the ideal valve for low pressure gas regulation. The self-contained low pressure gas regulator is for use on tank blanketing, gas
Type overview. Technical data. Safety notes
Technical ata sheet hange-over ball valve, 3-way, Flange, PN 6 For close col an warm water systems For switching functions on the water sie an 2-point controls in air hanling units an heating systems ir
TRANSLATION OF THE ORIGINAL MANUAL THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
l PUMPS EOS 15-C25 EOS 30-C25 TECNICL FETURES TRNSLTION OF TE ORIINL MNUL IMPORTNT : efore ssembly and Start-up, Please Read and Clearly Understand all the documents relating to this equipment (professional
RB 4000 Commercial & Industrial Regulator
R 4000 ommercial & Industrial Regulator The R 4000 pressure regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants and all installations where accurate
CATALOGUE
www.rotom.ca TOGU irdex Fan lades pplications Unitary ir onditioning eat Pumps and Ventilating 2 lade - eavy uty ondenser Type - Interchangeable ub Rotation iameter(") Pitch( ) lade epth (") 93-27702 W
NEW INTERLOCKING BLOCK RETAINING WALL, TYP. 7' - 0" 4' - 0" CRUSHED ROCK, TYP. 3' - 0" 8' - 0" 2' - 0" 3' - 0" 6' - 0" 24' - 0" 1% MIN.
' - 0" ' - 0" 6' - " ' - 8" 6' - 0" ' - 5" ' - 0" ' - " 6' - 7/" ' - /" ' - 0" RUSHE ROK, TYP. ' - 0" NEW INTERLOKING LOK RETINING WLL, TYP. ' - 0" LIMIT OF ITION OVE ' - " ON. SL ON. WLL - SEE STRUTURL
CE conform applications according to EN Windows without thermal break Systems Forster presto and Forster norm
CE conform applications according to EN 14351-1 Windows without thermal break Systems Forster presto and Forster norm 2 Properties Table 1 Window Operating forces Resistance to wind load Air permeability
PEC. Height units * 26 U 32 U U U U U 32 U U U 2180
PE SERIES Prime Line PE SERIES Prime Line Sheet Steel (EN 10130 D01) Frame : 1.5 Panel : 1.2 Glazed door : 1.5 Plinth : 1.5-2 Galvanized Steel (EN 10346 DX51D+Z) 19" profile : 2 units 26 U Hinge Useful
Inductive Proximity Sensors Global Plus Prox
July 2005 PG.05..T. -35 Global Plus ontents Overview................... -35 Model Selection, Sensors...... - Model Selection, ompatible onnector ables........... -37 Model Selection, ccessories... -37
GEMÜ SUMONDO Safe, cost effective, automation-capable
Safe, cost effective, automation-capable IPhEB St.Petersburg Valentin Rüttimann, Product Manager Single-Use Valves 16.04.2014 www.gemu-group.com As a new product from GEMÜ I am aiming to make Single-Use
HORIZONTAL SLIDER - NON-IMPACT
73 /" 72" MX. UNIT 7 7/8" MX. SSH /" GLSS LO HORIZONTL SLIER - NON-IMPT 3" MX. SSH WITH /" GLSS LO X 75 /" WITH 7" MX. UNIT WITH O 3" MX. SSH WITH /" GLSS LO 75 /" WITH 7" MX. UNIT WITH GENERL NOTES:.
AS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02
Spee Controller with One-touch Fittings Series Elbow Style, Universal Style Minimizes installation time an cost Reuces the mounting height an enables compact machinery esign. Effective area is larger than
20 to 280l/min 21MPa. econnecting a remote control valve to the vent port allows remote control of adjustment pressure.
Pressure Reducing (and heck) Valve eatures PRSSUR RU ( ) VV to 8l/min Pa -***-*- R -***-*- Specifications qthis valve is used when part of the circuit uses pressure that is lower than the main circuit.
EMI Ventilation & Filtration Panel
EMI Ventilation & Filtration Panel S OLUTIO N S Innovative Technology for a onnected World Table of ontents ElectroVent Shielding Ventilation Panels.....................2-5 MaxAir Vent Panels.............................................6-7
Pressure reducing valves (with check valve) X(C)G, XGL
Pressure reducing vlves (with check vlve) X()G, XGL 3- Pressure ontrol Vlves unctionl Symbols XG XGL X XG X Vlve is used to set pressure in brnch circuit lower thn pressure of the circuit. y connecting
GUARDEX Pump/Motor Mounts & Couplings
GURIN PMM 00 GUREX /Mor Mounts & ouplings ME IN U.S.. 300 Hwy 212 PO ox 7 Michigan ity, IN 6360 (219) 7-52 Fax (219) 79-663 www.guardiancouplings.com TLE OF ONTENTS Engine/ Mount Part Selection 2 Flexible
RECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
4. Advanced Adventure Diver
4. Advanced Adventure Diver 4.1 Introduction The purpose of this course is to give the diver an overview of 5 different specialties, 2 core, and 3 additional SDI Specialties. The two core specialties are,
Pneumatic retractable fitting for simple commercially available control units or process applications
Pneumatic Retractable Fittings hem Energy Pharm Food Water SensoGate W 3 Pneumatic retractable fitting for simple commercially available control units or process applications Variable and reasonably priced
Safety Edges Safedge Profiles Specifications
Presence Sensing Safety evices Specifications The ability of the Safedge profile to out perform competition lies in its innovative design. It uses a combination of non conductive rubber and flexible wire
Product Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
E. STRUCTURAL STEEL G. STRUCTURAL SPECIAL INSPECTIONS
9 9. GENERL STRUTURL NOTES. ESIGN INFORMTION. OES a. ESIGN ONFORMS TO I 9 NEW JERSEY EITION. b. MERIN ONRETE INSTITUTE (I) - "UILING OE REQUIREMENTS FOR STRUTURL ONRETE" I - c. MERIN INSTITUTE OF STEEL
COMMERCIAL. MK Series High Performance Butterfly Valve Specifications. Hot Water, Chilled Water, Condenser Water, Steam
OMMRIL MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas
Pressure relief valve DHV 725 set range: 0,2-10,0 bar
Pressure relief valve DHV 75 set range: 0, - 0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level
Operating instruction for the quick-change tap holders type:
type: HF 20 HF 30 Date of edition: 15.07.2008 Stage of alteration: 4 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application range,
LIVE STEAM TRACTION ENGINE CALLED "MINNIE" COAL FIRED
...... NOTES: ORIGINL ESIGN Y LEONR.C.MSON -, CONVERTE TO METRIC Y RTHUR GROVES - 00, RERWN Y JULIUS..M. E WL - 0 USING SOLIWORKS 0 GENERL RRNGEMENT JW RUGHTING SERVICES TE J..M. E WL. RIGHTWELL STREET
INCLUDING OUR NEW RANGE PICV & DOMINATOR REACHING FOR NEW HEIGHTS
INLUING OUR NEW RNGE PIV & OMINTOR REHING FOR NEW HEIGHTS VRILE FLOW PRESSURE INEPENENT ONTROL VLVE In modern uilding Services projects, the desire for energy efficiency is a primary consideration for
NEEDLE VALVES TYPE RA
R NL VLVS TYP R The products are included in pressure adjusting accessories class. They are designed according to main requests regarding the security assurance of the pressure equipment users, mentioned
F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges
Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure
THE EXPERT IN LEVEL AND FLOW
Magnetic Multi-Float-Switch Type: ITA-T1R Technical Information 01/2018 THE EXPERT IN LEVEL AND FLOW LEVEL ITA-T1R Technical Information Intra-Automation Intra-Automation Technical Information 01/2018
Expansion Thermometers Stainless Steel Series, Model 70
Mechanical Temperature Measurement Expansion Thermometers Stainless Steel Series, Model 70 WIKA Data Sheet TM 81.01 Applications General-purpose temperature measuring instruments for gaseous, liquid and
BERMAD Waterworks. Combination Air Valve. Air Valves Series. Typical Applications. Features & Benefits. Additional Features.
BERMA Waterworks Combination Air Valve Model C7 BERMA C7 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows
O O410. Winkel- Netzstecker. Netzstecker. XLR Neutrik. XLR Winkelstecker Sheet
11 1 6 3 -. -. - -7. + CNECT ANALOG Pin Signal + 1 LEVEL [d SPL at 1m] - 3 1 1 9 6 GAIN [d] TRELE [d] MIDRANGE [d] ASS [d] T IC K H ER E W HEN TRANSFORMER ALANCED OP TI IS FITTED YPASSED GAIN [d] HIGH
B2KL: 6-way ball valve with male thread, PN 16
Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover
For latest prices and delivery to your door visit MyTub Ltd
Technical ata sheet A6H / A6S Shut-off valves with clips, PN 6 / PN / PN 6, with manual overrie in open an close col an warm water systems for switching heating an cooling machines on an off Overview of
Accessories. Valves. Adjustable Pressure Relief Valves
Valves djustable Pressure Relief Valves djustable pressure relief valves allow for variable operating pressures anywhere between PSI ( bar). In order to prevent overloading of the motor, however, the maximum
Copyright 2015 Winnebago Industries, Inc.
anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.
Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.
Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They
Universal Gage. Multimar 844 T
Universal Gage Multimar 844 T Operating Instructions 3722483 0315 Mahr GmbH Standort Esslingen Reutlinger Str. 48, 73728 Esslingen Tel. +49 711 9312-600, Fax +49 711 9312-756 mahr.es@mahr.de, www.mahr.com
DK46 - DK800 Supplementary instructions
DK46 - DK800 Supplementary instructions Variable area flowmeter Device category II2G with electrical internals Additional Ex manual KROHNE CONTENTS DK46 - DK800 1 Safety instructions 3 1.1 General... 3
PCTV/PCMTV/PCTVS15-25
PTV/PMTV/PTVS N 15-25 revision 02 2017 PTV/PMTV/PTVS15-25 Pressure independent control valves, N15-N25 with integrated flow limiter for thermal emitters and differential pressure regulator PTV/PMTV/PTVS
Digital relief valves D-CG
Digital relief valves D-G unctional Symbols D-G- Specifications Size Maximum working pressure Rated flow Maximum flow Maximum adjustable pressure Ma Minimum control pressure Hysteresis Repeatability emperature
Dräger Pendula Medical Supply Units
Dräger Pendula Medical Supply Units Ceiling mounted multiple monitor holder for a flexible and ergonomic workplace design and the easy and secure positioning of the monitor application in the hybrid OR.
Product Information. Gripper for small components MPG-plus 16
Product Information MPG-plus 16 MPG-plus More powerful. Faster. Longer fingers. MPG-plus gripper for small components 2-finger parallel gripper with smooth roller guides of the base jaws Field of application
HORNE T109A/306A/307A THERMOSTATIC SHOWER VALVE FOR SURFACE MOUNTING WITH TIMED FLOW CONTROL INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
Horne Engineering Ltd PO Box 7, Rankine Street Johnstone, PA5 8BD Tel: +44 (0)1505 321455 Fax: +44 (0)1505 336287 Email: Technical@horne.co.uk Web: www.horne.co.uk HORNE T109A/306A/307A THERMOSTATI SHOWER
erc-o 2 -tech Ò innovative gas systems Markwerbener Str Weißenfels Germany
Compart Umwelttechnik GmbH erc-o 2 -tech Ò innovative gas systems Markwerbener Str. 24 06667 Weißenfels Germany Phone: 0049 (0) 3443/2901-0 Fax: 0049 (0) 3443/2901-12 Mail: compart-weissenfels@t-online.de
Waveguide and Flange Data
Waveguide and lange ata requency Range (hz) ritish W Waveguide esignation I R I WR Internal imensions (mm) lann Standard flange details Please see page 110-115 for outline dimensions lange esignation escription
Industrial Regulator Series 1800/2000
E S 85. Industrial Regulator Series / M Quality System QMI is ccredited by: R E I T ISO 9 ertified R E NSI R G I S T R R utch ouncil for ccreditation Measurement Engineers Since 86 merican Meter Series
OPTIONS. Mounting ACCESSORIES FLEXAC.CLIP FLEXAC.EC FLEXAC.P6 FLEXAC.4.C04 FLEXAC.4.C10 PERFORMANCE
FLEX 4 FLEX features driver-less LE technology R9 Values of 60+ Optically clear thermoplastic coating rated for IP65, interior or exterior This product can run up to 100 ft from a single feed with uniform
NORDEX. Foundations. Nordex N117/3000
Foundations Nordex N117/3000 Nordex Energy GmbH, Langenhorner Chaussee 600, 22419 Hamburg, Germany All rights reserved. Observe protection notice ISO 16016. K0801_042963_EN Revision 00, 2013-02-04 1 /
References in selected architectural projects Industry and Services. Products fina fina conference finasoft milanolight MIS trust
Sophisticated Design Creates Room for Good Communication Reemtsma in Hamburg has added a conference centre equipped with functional furniture from the fina series. The client was very content, since the
BROWNING E920 TAPERED ROLLER BEARING
ROWNING E920 TPERE ROER ERING ROWNING TPERE ROER ERING E920 Series ual Steel ock ollars ct as flingers for additional protection against contaminants ast Iron Housing One-piece cast iron semi solid housing
Column w/laterals. Steel Column A992 50ksi Steel. 1 Rev
olumn w/ SOREOR HEIGHT WITH ddtional display area consisting signs, arches, message centers or video above or below the scoreboard. (see sheets 7) for column and pier sizing) Equal TOP SOREOR SETION OTTOM
Shift Chain. ST - N : Normal type. ST - E : Enclosed type. ST - S : Skid type ST044 E ST055 E ST072E ST095E ST120E ST150E
Shift hain ST - N : Normal type ST - : nclosed type ST - S : Skid type ST044 N ST0 N ST02N ST09N ST0N ST0N -9 - - - -1-19 ST044 ST0 ST02 ST09 ST0 ST0-2 -29-1 - - - ST044 S -4-1 www.cpsystem.co.kr ST -
Maximum Inlet Pressure. Maximum Outlet (Casing) Pressure. Outlet Pressure Range. 2-inches w.c. to 10 psig (5 mbar to 0,69 bar) Flow Coefficients
Introduction The quickreacting S200 Series pressure reducing service regulators are typically used in industrial or commercial installations to minimize the shock effect of sudden downstream load changes
Proportional Valve Group PVG 32 Order Specifications
MKING MORN LIVING POSSIL Technical Information Proportional Valve Group powersolutions.danfoss.com Revision History Table of Revisions ate hanged Rev Feb 214 onverted to anfoss layout IT MS J Feb 26 Jan
Reservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
SO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
The Enerpac Lightweight Aluminum Cylinders
The nerpac Lightweight luminum s Shown: RC, RCL, RC, and RR R : 20-150 tons - inches Lightweight, easy to carry and position to allow a higher cylinder capacity-to-weight-ratio Non-corrosive by design,
HIGH-PRESSURE RELIEF VALVES H-900HP SERIES
IPRSSUR RLI VLVS 9P SRIS TURS n 9P is available as /P products. n 316St.St. onstruction n Service up to psi n Set Pressure from 5 psig to psig ( 3.5 to 414 bar) n Identifying colored springs for each pressure
P-Series, Lightweight Hand Pumps. Exclusively from Enerpac. 70
-eries, ightweight and umps umps shown, from top to bottom: -802, -842, -202, -142 xclusively from nerpac ylinder Matching hart For help in selecting the correct hand pump for your application, please
OPERATING MANUAL CHEMTRAC 840M MANUAL RETRACTABLE PROCESS HOLDER
OPERATING MANUAL CHEMTRAC 840M MANUAL RETRACTABLE PROCESS HOLDER Table of contents 1 Security and safety measures... 5 1.1 General safety instructions... 5 1.2 Intended use... 5 1.3 Danger zones and residual
LOK-BOLT AS. Mechanical Anchors GENERAL INFORMATION SECTION CONTENTS. Sleeve Anchor
General Information Mechanical s GENERAL INFORMATION LOK-BOLT AS Sleeve PRODUCT DESCRIPTION The Lok-Bolt AS is an all-steel pre-assemble single unit sleeve anchor which is esigne for use in concrete or
OCEAN - Wellness Line
147 Modern and functional: The range for shower and sauna doors. CONTENTS Technical details 1-151 Materials and surface finishes 152 Product information Shower hinges 153 Connectors and shower door knobs
FL200 Monochromatic Architectural Spot and Floodlight
DATE: TYPE: COMPANY: PROJECT: 360 375mm 14.7in 463mm 18.2in 269mm 10.7in 421mm 16.6in 77mm 3.0in *SM bracket mounting option shown. See page 2 for more mounting options. FEATURES: OPTIONS: Over 16,500
GBA-800. NEW G-SQUAD Sports Line G-SQUAD. Technology & Design Guide. A smartphone-linked model to help you with your daily workout
G-SQU G-800 Technology & esign Guide smartphone-linked model to help you with your daily workout NEW G-SQU Sports Line Technology Sales Points esign Sales Points - Smartphone Link - utomatic step tracking
Í º ½ ²óÒ± ³ ² ¾ ½ ²óÒ± ³
ï³ î³ îòë³ í³ ì³ ë³ ê³ Í º ½ ²óÒ± ³ ² ¾ ½ ²óÒ± ³ Õ¹ñ³ Í ±µ» î³ ì³ ë³ ê³ è³ ïð³ ïî³ Shift hain ST - N : Normal type ST - : nclosed type ST - S : Skid type ST044 N ST0 N ST02N ST095N ST120N ST0N -9 - -
ACCREDITED. Technical specifications series
nti-pollution check valves 0-0-0-0-0 series REITE ISO 0 FM LEFFI 000/ G replaces dp 000/0G Function The anti-pollution check valve is a protective plumbing device capable of preventing the backflow of
TRANSMITTAL COVER. Document Attached: CCAT-JEC-DSl-0041, RFI 01382, PG S 1003B and PG S 1104 Action:
PRSONS RINKERHO NORH ERMINL PROJE LOUIS RMSRONG NEW ORLENS INERNIONL IRPOR NEW ORLENS, LOUISIN RNSMIL OVER ate : /8/06 o: ompany: HGM Person: ocument ontrol ransmittal #: 04405-007-0l rom: ompany: P Person:
Gas Pressure. Regulators Catalog. For Industrial Engines and Generator Sets. 2011, Maxitrol Company. All Rights Reserved.
Gas Pressure Regulators Catalog For Industrial Engines and Generator Sets 1 GAS PRESSURE REGULATORS For Industrial Engines and Generator Sets Service and or installation must be performed by a trained,
ISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
Gas Filters DN15 DN300. elektrogas.com EE151 06/13
FG Gas Filters DN15 DN300 elektrogas.com EE151 06/13 FG Gas Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Accessories and optionals 4 Technical specifications 4 Gas flow
NEW: EASY GLASS VIEW THE INVISIBLE JULIET BALCONY
NEW: EASY GASS VIEW THE INVISIBE JUIET BACONY UNINTERRUPTED VIEW YOU WI HARDY NOTICE THE JUIET BACONY! EASY GASS VIEW CONSISTS OF ITTE MORE THAN THE GASS PROVIDING UNPRECEDENTED TRANSPARENCY. IN SPITE
Saab Seaeye Cougar XT Compact
The Seaeye Cougar-XT Compact is a highly flexible and extremely powerful electric ROV with working depths of 300 metres. This system comes with almost all of the specifications of the very reliable Couger-XT
EC type-examination certificate UK/0126/0065 Revision 1
UK/0126/0065 MI-005 EC type-examination certificate UK/0126/0065 Revision 1 issued by: The National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Measuring Instruments
FACE CONSULTANTS LIMITED. Accelerated Abrasion Resistance Surveys. BS :2002 And BS : A2: 2011
FACE CONSULTANTS LIMITED Accelerated Abrasion Resistance Surveys In accordance with BS 13892-4:2002 And BS 8204-2: 2003 + A2: 2011 Further explanatory information What is Abrasion Resistance? Abrasion
Operating Instructions VETTER Industrial Lifting Bags 8 bar - Type IKV
Industrial Pneumatics. Operating Instructions VETTER Industrial Lifting Bags 8 bar - Type IKV Article No. 87015301 Vetter GmbH I 03/12 I Changes and errors excepted. Vetter Industrial Lifting Bags 8 bar