RESILIENT VINYL STAIR TREAD AND NOSING

Transcription

1 THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY INFORMATION OR SPECIFICATIONS FOUND IN THIS DOCUMENT. ENSURE THAT YOU HAVE THE LATEST PUBLICATION FOR THIS SPECIFICATION. THE SPECIFIER OR DESIGNER IS RESPONSIBLE FOR PRODUCT SELECTION AND ACCURACY OF ALL PROJECT SPECIFICATIONS, INCLUDING ANY JOHNSONITE INFORMATION OR SPECIFICATIONS USED. PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general prvisins f the Cntract, including General and Supplementary Cnditins and Divisin 01 Specificatin Sectins, apply t this Sectin. 1.2 SUMMARY A. Sectin Includes: 1. Resilient Stair Tread and Nsing. 1.3 SUBMITTALS A. Prduct Data: Fr each type f prduct indicated. B. LEED Submittals: 1. Prduct Data fr Credit EQ 4.1: Fr adhesives, including printed statement f VOC cntent and chemical cmpnents. C. Samples fr Initial Selectin: Fr each type f prduct indicated. D. Samples fr Verificatin: Fr each type f prduct indicated, in manufacturer's standard-size samples f each resilient prduct clr, texture, and pattern required. Original May 2011 Page 1 f Treads, Nsings Vinyl

2 E. Prduct Schedule: Fr resilient prducts. Use same designatins indicated n Drawings. 1.4 QUALITY ASSURANCE A. Mckups: Prvide resilient prducts with mckups specified in ther Sectins. 1.5 DELIVERY, STORAGE, AND HANDLING A. Stre resilient prducts and installatin materials in dry spaces prtected frm the weather, with ambient temperatures maintained within range recmmended by Jhnsnite, but nt less than 55 deg F (13 deg C) r mre than 85 deg F (29 deg C). 1.6 PROJECT CONDITIONS A. Install resilient prducts after ther finishing peratins, including painting, have been cmpleted. B. Maintain ambient temperatures within range recmmended by Jhnsnite, but nt less than 65 deg F (18 deg C) r mre than 85 deg F (29 deg C) in spaces t receive resilient prducts during the fllwing time perids: hurs befre installatin. 2. During installatin hurs after installatin. C. Maintain the ambient relative humidity between 40% and 60% during installatin. D. Until Substantial Cmpletin, maintain ambient temperatures within range recmmended by Jhnsnite, but nt less than 55 deg F (13 deg C) r mre than 85 deg F (29 deg C). Original May 2011 Page 2 f 9

3 PART 2 - PRODUCTS 2.1 Manufacturer: Jhnsnite, Inc. Phne (800) Munn Rad (440) Chagrin Falls, Ohi Tech: Ext 9297 Web: Samples: Ext inf@jhnsnite.cm Fax: (440) ENVIRONMENTAL SUSTAINABILITY NOTES: Jhnsnite Resilient Vinyl Stair Tread and Nsing Jhnsnite ffers a RESTART reclamatin prgram fr returning unused jbsite scrap Vinyl Stair Treads cntain pre cnsumer recycle cntent 100% Recyclable SCS FlrScre Certified and meets Califrnia Specificatins Sectin Jhnsnite facilities are ISO 9001 and ISO Certified Fr all envirnmental sustainability infrmatin visit ecscrecard n Jhnsnite hme page at A. Resilient Vinyl Stair Tread: JOHNSONITE VINYL STAIR TREAD specify Vinyl Stair Tread withut riser with the fllwing physical characteristics: a. Manufactured frm a hmgeneus cmpsitin f plyvinyl chlride (PVC). b. Cmplies with requirements fr ASTM F 2169 Standard Specificatin fr Resilient Stair Treads, Type TV, Class 2, Grup 1 and 2. c. Hardness: ASTM D 2240 Nt less than 85 Shre A. d. Abrasin Resistance: ASTM D mg/cycle. e. ASTM D 2047, Standard Test Methd fr Static Cefficient f Frictin f Plish- Cated Flring f 0.6 r greater. f. ASTM E 648, Standard Test Methd fr Critical Radiant Flux f 0.45 watts/cm 2 r greater, Class I. g. Visually-Impaired treads meet ADA and are Califrnia Title 24 Accessibility requirements. Original May 2011 Page 3 f 9

4 1. Slid Clr Vinyl Stair Treads withut Riser: Fr Service Weight surface, slid clr tread withut riser, 2" height Square Nse r 1 9/16" diameter Rund Nse, tapering 5/32" t 5/64", 12" tread depth Specify (ST Specify nse [square{sq} r rund {RD}] ) Fr Safe-T-Rib surface, slid clr tread withut riser, 2" height hinged Square Nse r 1 5/8" diameter Rund Nse, tapering 1/4" t 1/8", 12 1/4" tread depth Specify (HT Specify nse [square{sq} r rund {RD}] ) Fr Heavy Duty surface, slid clr tread withut riser, 2" height hinged Square Nse, 1/4" tread thickness, 12 1/4" tread depth Specify (HD Specify nse [square{sq}] ) 2. Visually Impaired Vinyl Treads withut Riser: Fr Safe-T-Rib surface, slid clr tread withut riser, visually impaired, 2" height hinged Square Nse r 1 5/8" diameter Rund Nse, tapering 1/4 " t 1/8", 12 1/4" tread depth, with 2" wide cntrasting clr grit tape insert Specify (VIHT Specify nse [square{sq} r rund {RD}] ) Fr Safe-T-Grip surface, slid clr tread withut riser, visually impaired, 2" height hinged Square Nse, tapering 1/4 " t 1/8", 12 1/4" Tread Depth, with 2" wide cntrasting clr grit tape insert Specify (VIVG Specify nse [square{sq}] ) Fr Heavy Duty surface, slid clr tread withut riser, visually impaired, 2" height hinged Square Nse, 1/4" tread thickness, 12 1/4" tread depth with 2" wide cextruded cntrasting clr insert Specify (VIHD Specify nse [square{sq}] ) Original May 2011 Page 4 f 9

5 3. Visually Impaired Vinyl Treads withut Riser with Phtluminescent Insert: Fr Heavy Duty surface, slid clr tread withut riser, visually impaired with Phtluminescent insert, 2" height hinged Square Nse, 1/4" tread thickness, 12 1/4" tread depth with 2" wide c-extruded Phtluminescent cntrasting clr insert Specify (PVIHD Specify nse [square{sq}] Specify Phtluminescent insert clr [yellw r white] ) B. Resilient Vinyl Stair Nsing: JOHNSONITE VINYL STAIR NOSING specify Vinyl Stair Nsing with the fllwing physical characteristics: a. Manufactured frm a hmgeneus cmpsitin f plyvinyl chlride (PVC). b. Standard Stair Nsing cmplies with requirements fr ASTM F 2169 Standard Specificatin fr Resilient Stair Treads, Type TV, Class 1 and 2, Grup 1 and 2. c. Slim Line Stair Nsing cmplies with requirements fr ASTM F 2169 Standard Specificatin fr Resilient Stair Treads, Type TV, Class 2. d. Hardness: ASTM D 2240 Nt less than 85 Shre A. e. Abrasin Resistance: ASTM D mg/cycle. f. ASTM D 2047, Standard Test Methd fr Static Cefficient f Frictin f Plish- Cated Flring f 0.6 r greater. g. ASTM E 648, Standard Test Methd fr Critical Radiant Flux f 0.45 watts/cm 2 r greater, Class I. h. Square nse treads are hinged. i. Visually-Impaired treads meet ADA and are Califrnia Title 24 Accessibility requirements. 1. Flexible Slim Line Recess Nsing, Slid Clr: Fr Slim Line Recess Nsing, 1/4" material n step and riser, slid clr, visible 13/16" height hinged Square Nse, visible 1 11/32" tread, 12' length Specify (SLN specify clr by number and name A) Fr Slim Line Recess Nsing, 7/32" material n step and 1/4" material n riser, slid clr, visible 11/16" height hinged Square Nse, visible 1 11/32" tread, 12' length Specify (SLN specify clr by number and name B) Fr Slim Line Recess Nsing, 3/8" material n step and riser, slid clr, visible 1" height hinged Square Nse, visible 1 11/32" tread, 12' length Specify (SLN specify clr by number and name C) 2. Standard Vinyl Stair Nsing, Slid Clr: Fr Stair Nsing, 1/8" material butt-t n step, slid clr, 2" height hinged Square Nse r 1 1/2" diameter Rund Nse, 2 1/16" tread depth, 12' length Specify (VDL specify clr by number and name specify nse [square{sq} r rund {RD}] ) Fr Stair Nsing, 1/8" material recessed r 3/16" material butt-t n step, slid clr, 2" height hinged Square Nse, 3" ribbed tread depth, 12' length Specify (RCN specify clr by number and name B) Fr Stair Nsing, 1/8" material recessed r 3/16" material butt-t n step, slid clr, 2" height hinged Square Nse, 3" tread depth, 12' length Original May 2011 Page 5 f 9

6 Specify (SRCN specify clr by number and name B) Fr Stair Nsing, 1/4" and 5/16" material recessed n step, slid clr, 2 1/4" height hinged Square Nse, 1 15/16" tread depth, 12' length Specify (RCN specify clr by number and name A) Fr Stair Nsing, 1/4" t 5/16" material recessed n step, slid clr, 2" height hinged Square Nse, 3 1/8" tread depth, 12' length Specify (SRCN specify clr by number and name A) Fr Stair Nsing, 3/8" material recessed n step, slid clr, 2" height hinged Square Nse, 3 1/8" tread depth, 12' length Specify (SRCN specify clr by number and name C) Fr Stair Nsing, 3/8" material recessed n step and riser, slid clr, 1 1/2" height hinged Square Nse, 3 1/8" tread depth, 12' length Specify (SVCD specify clr by number and name A) Fr Stair Nsing, 1/4" and 5/16" material recessed n step and riser with ribbed surface, slid clr, 1 9/16" height hinged Square Nse, 1 5/16" tread depth, 12' length Specify (VCD specify clr by number and name ) Fr Stair Nsing, tp set fr residential, slid clr, 1 3/4" height Square Nse, 1 3/4" tread depth, 12' length Specify (DTN specify clr by number and name) 3. Visually Impaired Vinyl Stair Nsing with c-extruded cntrasting clr insert: Fr Stair Nsing, visually impaired, 1/4" t 5/16" material recessed n step, 2" height hinged Square Nse, 3 1/8" tread depth with 2" wide c-extruded cntrasting clr insert, 12' length Specify (VIRCN specify clr by number and name A) Fr Stair Nsing, visually impaired, 1/8" material recessed r 3/16" material butt-t n step, 2" height hinged Square Nse, 3" tread depth with 2" wide c-extruded cntrasting clr insert, 12' length Specify (VIRCN specify clr by number and name B) Fr Stair Nsing, visually impaired, 1/8" r 5/16" material recessed n step and riser, 2" height hinged Square Nse, 3 3/16" tread depth with 2" wide c-extruded cntrasting clr insert, 12' length Specify (VIVCD specify clr by number and name ) Fr Stair Nsing, visually impaired, tp set, 2" height hinged Square Nse, 3 3/16" tread depth with 2" wide c-extruded cntrasting clr insert, 12' length Specify (VITSN specify clr by number and name ) 4. Visually Impaired Vinyl Stair Nsing with 2" cntrasting clr grit tape insert: Fr Stair Nsing, visually impaired, 1/8" material recessed r 3/16" material butt-t n step, 2" height hinged Square Nse, 3" tread depth with 2" wide cntrasting clr grit tape insert, 12' length Specify (VIRCN specify clr by number and name B2) Original May 2011 Page 6 f 9

7 5. Visually Impaired Vinyl Stair Nsing with Phtluminescent Insert: Fr Stair Nsing, visually impaired, tp set, 2" height hinged Square Nse, 3 3/16" tread depth with 2" wide c-extruded Phtluminescent cntrasting clr insert, 12' length Specify (PVITSN specify clr by number and name A specify Phtluminescent insert clr [yellw r white] ) Fr Stair Nsing, visually impaired, 1/4" t 5/16" material recessed n step, 2" height hinged Square Nse, 3 1/8" tread depth with 2" wide c-extruded Phtluminescent cntrasting clr insert, 12' length Specify (PVIRCN specify clr by number and name A specify Phtluminescent insert clr [yellw r white] ) Fr Stair Nsing, visually impaired, 1/8" material recessed r 3/16" material butt-t n step, 2" height hinged Square Nse, 3" tread depth with 2" wide c-extruded Phtluminescent cntrasting clr insert, 12' length Specify (PVIRCN specify clr by number and name B specify Phtluminescent insert clr [yellw r white] ) Fr Stair Nsing, visually impaired, 1/8" r 5/16" material recessed n step and riser, 2" height hinged Square Nse, 3 3/16" tread depth with 2" wide c-extruded Phtluminescent cntrasting clr insert, 12' length Specify (PVIVCD specify clr by number and name specify Phtluminescent insert clr [yellw r white] ) Fr Stair Nsing, visually impaired, 1/8" material recessed r 3/16" material butt-t n step, 2" height hinged Square Nse, 3" tread depth with 2" wide Phtluminescent cntrasting clr grit tape insert, 12' length Specify (PVIRCN specify clr by number and name B2) 2.2 INSTALLATION MATERIALS A. Trwelable Leveling and Patching Cmpunds: Latex-mdified, prtland cement based frmulatin manufactured and warranted by a reputable manufacturer. B. Adhesives: as recmmended by Jhnsnite t meet site cnditins. 1. Jhnsnite #965 Flring and Tread Adhesive. 2. Jhnsnite #945 Cntact Bnd Adhesive. 3. Jhnsnite #975 Tw-Part Urethane Adhesive. 4. Jhnsnite #996 Tw-Part Epxy. C. Stair-Tread-Nse Filler: Jhnsnite #930 Tw-Part Epxy Caulking Cmpund t fill nsing substrates that d nt cnfrm t tread cnturs. PART 3 - EXECUTION 3.1 EXAMINATION A. Examine substrates, with Installer present, fr cmpliance with requirements fr maximum misture cntent and ther cnditins affecting perfrmance f the wrk. Original May 2011 Page 7 f 9

8 B. Verify that finishes f substrates cmply with tlerances and ther requirements specified in ther Sectins and that substrates are free f cracks, ridges, depressins, scale, and freign depsits that might interfere with adhesin f resilient prducts. C. Prceed with installatin nly after unsatisfactry cnditins have been crrected. 3.2 PREPARATION A. Prepare substrates accrding t manufacturer's written instructins t ensure adhesin f resilient prducts. 1. Verify that substrates are dry and free f curing cmpunds, sealers, and hardeners. 2. Remve substrate catings and ther substances that are incmpatible with adhesives and that cntain sap, wax, il, r silicne, using mechanical methds recmmended by manufacturer. D nt use slvents. 3. Mechanically remve cntaminatin n the substrate that may cause damage t the resilient flring material. Permanent and nn-permanent markers, pens, crayns, paint, etc., must nt be used t write n the back f the flring material r used t mark the substrate as they culd bleed thrugh and stain the flring material. 4. Prepare Substrates accrding t ASTM F 710 including the fllwing: a. Misture Testing: Perfrm tests recmmended by manufacturer. Prceed with installatin nly after substrates pass testing. 1) Perfrm anhydrus calcium chlride test, ASTM F Results must nt exceed 5 lbs. Misture Vapr Emissin Rate per 1,000 sq. ft. in 24 hurs. r 2) Perfrm relative humidity test using in situ prbes, ASTM F Must nt exceed 80%. b. A ph test fr alkalinity must be cnducted. Results shuld range between 7 and 9. If the test results are nt within the acceptable range f 7 t 9, the installatin must nt prceed until the prblem has been crrected. c. Alkalinity and Adhesin Testing: Perfrm tests recmmended by manufacturer. 5. Wd steps/substrates a. The substrate must be rigid, free f mvement. b. Single wd and tngue and grve substrate shuld be cvered with 1/4" (6.4 mm) r 1/2" (13 mm) APA apprved underlayment plywd. 1) Use 1/4" (6.4 mm) thick underlayment panels fr bards with a face width f 3" (76 mm) r less. 2) Use 1/2" (76 mm) thick underlayment panels fr bards with a face width wider than 3" (76 mm). c. D nt install ver OSB (Oriented Strand Bard), particle bard, chipbard, lauan r cmpsite type underlayments. B. Fill cracks, hles, depressins and irregularities in the substrate with gd quality Prtland cement based underlayment leveling and patching cmpund and remve bumps and ridges t prduce a unifrm and smth substrate. C. Flr cvering shall nt be installed ver expansin jints. Original May 2011 Page 8 f 9

9 D. D nt install resilient prducts until they are same temperature as the space where they are t be installed. 1. Mve resilient prducts and installatin materials int spaces where they will be installed at least 48 hurs in advance f installatin. E. Sweep and vacuum clean substrates t be cvered by resilient prducts immediately befre installatin. 3.3 RESILIENT STAIR TREAD AND NOSING INSTALLATION A. Cmply with manufacturer's written instructins fr installing resilient accessries. B. Resilient Stair Tread and Nsing: 1. Use Jhnsnite #930 Epxy Caulking Cmpund t strengthen nsing and fill irregularities in substrates t cnfrm t tread nsing. 2. Tightly adhere t substrates thrughut length f each piece. 3. Fr treads installed as separate, equal-length units, install t prduce a flush jint between units. 3.4 CLEANING AND PROTECTION A. Cmply with manufacturer's written instructins fr cleaning and prtectin f resilient prducts. B. Perfrm the fllwing peratins immediately after cmpleting resilient prduct installatin: 1. Remve adhesive and ther blemishes frm expsed surfaces. 2. Sweep and vacuum surfaces thrughly. 3. Damp-mp surfaces t remve marks and sil. C. Prtect resilient prducts frm mars, marks, indentatins, and ther damage frm cnstructin peratins and placement f equipment and fixtures during remainder f cnstructin perid. D. Cver resilient prducts until Substantial Cmpletin. END OF SECTION Original May 2011 Page 9 f 9